Overview
The Skyjacker H7078 is a rear Softride Hydro Series hydraulic shock absorber, part number H7078, made for 1973–1991 Chevrolet and GMC trucks and SUVs and for 2000–2002 Dodge Ram 2500 and 3500 Base trucks. A shock absorber, also called a damper, controls how fast the suspension compresses and rebounds, and this twin tube unit is built to do that at the rear axle.
The H7078 uses hydraulic damping rather than gas charging and has a 5/8 in. hardened, double chrome rod. Its lift height is w/10 – 9 in. Lift. Confirm the intended range before installing.
Key features
- Multi-stage velocity sensitive valving, which changes damping as the shock moves faster or slower.
- Twin tube construction for hydraulic damping.
- Hardened, double chrome piston rod measuring 5/8 in. in diameter.
- Bonded iron piston.
- Red polyurethane bushings.
- Red boot included.
- Limited Lifetime Warranty.
- 15 other colors are available.
Rear shock basics
A rear shock absorber controls how the axle rebounds after a bump and how quickly it compresses under load. On older trucks the rear suspension carries heavy loads and often sees rough roads, so damping that stays consistent matters. Twin tube hydraulic designs use fluid flow through valving to control that movement.
Multi-stage velocity sensitive valving responds differently to slow and fast shaft movement, which helps the truck settle after a dip without feeling harsh over small bumps. Rear shocks are commonly replaced in pairs so both sides match. When replacing one, check the rear springs, bushings and spring perches, since a worn part can make a new shock seem faulty.
- Look for oil on the shock body
- Check the red boot for cracks or tears
- Confirm the rear position before buying
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7078 |
| UPC | 803696141084 |
| Series | H7000 (Hydro Series) |
| Position | Rear |
| Fitment type | Direct Fit |
| Lift height | w/10 – 9 in. Lift |
| Hydraulic / gas charged | Hydraulic |
| Piston rod | 5/8 in. diameter, hardened, double chrome |
| Piston | Bonded iron |
| Bushings | Red polyurethane |
| Boot | Red |
| Sold as | Each |
Vehicle fitment
It fits 1973 through 1991 Chevrolet and GMC K-series, V-series, Blazer, Jimmy and Suburban models, plus 2000 through 2002 Dodge Ram 2500 and 3500 Base trucks. Base, Custom Deluxe, Scottsdale, Silverado, Cheyenne and Sierra Classic trims are among those covered, depending on the model.
Not on this list: 1992–1998 Chevrolet and GMC K1500 and K2500 pickups, and 1999 and newer Silverado or Sierra 1500 trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a rear position shock, so match it to the rear axle and leave the front suspension alone. The lift height reads w/10 – 9 in. Lift. Measure your own lift height and confirm the intended range before installing.
What’s included
One shock absorber with its red boot. The product is sold as each.








