Overview
The Skyjacker Softride Hydro H7043 is a rear hydraulic shock absorber for suspension lifts of 0 to 2 in., sold as each. It fits 1973 to 1991 Chevrolet and GMC trucks, including C, K, R and V series pickups and Suburbans, plus Chevrolet Blazer, K5 Blazer and GMC Jimmy models.
Softride Hydro is Skyjacker’s hydraulic shock line, built on a twin tube body with a chromed piston rod and red polyurethane bushings. Skyjacker marks the H7043 as Direct Fit for the rear position and matches it to a 0 to 2 in. lift, so measure your current suspension height before choosing it.
Key features
- Multi-stage velocity sensitive valving for controlled damping
- Heavy-duty twin tube construction
- Hardened 5/8 inch diameter rod with a double chrome finish
- Bonded iron piston
- Red polyurethane bushings
- Red boot included
- Hydraulic action rather than gas charged
- Limited lifetime warranty.
Measuring lift before you buy
A rear shock works with the springs and the axle to control how the truck settles after bumps. When a lift changes ride height, the shock’s installed length and travel change too, so it is worth measuring the height you run now before choosing a model rated for a range. Shock length should also suit the mounting points on an older truck, where bushings and brackets may have softened over decades of use.
Replacing both rear shocks at the same time keeps damping even from side to side. A worn shock often leaks fluid, knocks over bumps, or lets the rear bounce after a dip. Check the bolts and brackets while the shock is off, and recheck the fasteners after the first few drives. Hydraulic shocks handle heat from repeated use more predictably than worn units, which matters on long grades.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7043 |
| UPC | 803696137001 |
| Product line | Softride Hydro, Series H7000 |
| Position | Rear |
| Fitment type | Direct Fit |
| Lift range | 0 to 2 in. |
| Damping | Hydraulic, multi-stage velocity sensitive valving |
| Construction | Twin tube |
| Piston | Bonded iron |
| Piston rod | 5/8 in. diameter, hardened, double chrome |
| Bushings | Red polyurethane |
| Boot | Red, included |
| Color options | 15 other colors available |
| Warranty | Limited lifetime warranty. |
| Sold as | Each |
Vehicle fitment
The H7043 fits 1973 to 1991 Chevrolet and GMC full-size trucks. Chevrolet models include C10, C20 and C30 pickups and Suburbans, K10, K20 and K5 Blazer, R10, R20 and V10 and V20 models, and the Blazer. GMC models include C15, C25, K15, K25, C1500, K1500, K2500 and R and V series Suburbans, plus the Jimmy. Trims named include Custom, Cheyenne, Scottsdale, Silverado and Sierra Classic.
Years outside 1973 to 1991 are not on this list, and neither are other makes. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each H7043 is a single shock, so you need one for every position you replace. Skyjacker rates it for 0 to 2 in. of lift, so measure your current suspension height before installing it. Support the truck on stands while you remove the factory shock.
What’s included
A Skyjacker Softride Hydro H7043 shock absorber with red polyurethane bushings and a red boot.
Not included: the other shock for the opposite side, since the H7043 is sold as each.









