Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 505–516 of 3453 resultsSorted by popularity
-
-
Shock Absorbers & Shock Accessories
Icon Suspension 4.5 Lift Front Shock 2.0 Aluminum Series – 216523R
Shock Absorbers & Shock AccessoriesIcon Suspension 4.5 Lift Front Shock 2.0 Aluminum Series – 216523R
- Front shock for a 4.5 inch lift, 2.0 Aluminum Series
- Fits 2003–2013 Dodge and Ram 2500 and 3500 trucks
- Part number ICO216523R
- Front position, direct-fit listing
- Supplied as a single front shock
SKU: ICO216523R -
Shock Absorbers & Shock Accessories
Icon Suspension 3.0 Series Remote Reservoir Coilover Shock Kit with CDCV – 58755
Shock Absorbers & Shock AccessoriesIcon Suspension 3.0 Series Remote Reservoir Coilover Shock Kit with CDCV – 58755
- Front 3.0 Series remote reservoir coilover with CDCV, fits 2007–2021 Toyota Tundra
- Piston area 50% larger in the ride zone and 100% larger in the bump zone than 2.5 inch coilovers
- Multi-stage hydraulic bump zone in the last 40% of travel
- Built-in ride height adjustability for 1.63 to 3.5 inches of front lift
- Part number ICO58755
SKU: ICO58755 -
Shock Absorbers & Shock Accessories
Icon Suspension 2.0 Aluminum Series Remote Reservoir Shock – 56502R
Shock Absorbers & Shock AccessoriesIcon Suspension 2.0 Aluminum Series Remote Reservoir Shock – 56502R
- Rear remote reservoir 2.0 Aluminum Series shock for 1995–2004 Toyota Tacoma
- Vehicle-specific valving and rebuildable design
- Aluminum body for heat dissipation
- Direct-fit rear position
- Part number ICO56502R
SKU: ICO56502R -
Shock Absorbers & Shock Accessories
Icon Suspension 2 Inch Rear 2.5 Series Piggyback Reservoir Shocks – 217707P
Shock Absorbers & Shock AccessoriesIcon Suspension 2 Inch Rear 2.5 Series Piggyback Reservoir Shocks – 217707P
- Rear 2.5 Series piggyback reservoir shock for a 2 inch lift, fits 2014–2018 Ram 2500
- 6061 billet aluminum manifold creates an internal bump zone
- Bump zone adds about 20% more damping force near full compression
- Rebuildable and revalveable
- Part number ICO217707P
SKU: ICO217707P -
Shock Absorbers & Shock Accessories
Icon Suspension 1-3 Inch Lift Rear Shock 2.0 Aluminum Series – 216524
Shock Absorbers & Shock AccessoriesIcon Suspension 1-3 Inch Lift Rear Shock 2.0 Aluminum Series – 216524
- Rear 2.0 Aluminum Series shock for a 1 to 3 inch lift, fits Ram 1500 2009–2024
- Nitrogen-charged monotube with an internal reservoir
- One-piece linear and digressive piston with 5WT shock oil
- Rebuildable and revalveable
- Part number ICO216524
SKU: ICO216524 -
Shock Absorbers & Shock Accessories
Icon Suspension 1.75 – 3 Inch Front Remote Reservoir Coilover Shock Kit with CDCV – 71510C
Shock Absorbers & Shock AccessoriesIcon Suspension 1.75 – 3 Inch Front Remote Reservoir Coilover Shock Kit with CDCV – 71510C
- Front remote reservoir coilover with CDCV valve for a 1.75 to 3 inch lift, fits 2015–2022 Chevrolet Colorado and GMC Canyon
- CDCV valve with 10 external settings from soft to hard
- 2.5 inch body with a remote reservoir
- Designed to pair with ICON rear shocks for balanced front to rear control
- Part number ICO71510C
SKU: ICO71510C -
Shock Absorbers & Shock Accessories
Icon Suspension 1.75 – 3 Inch Front Remote Reservoir Coilover Shock Kit – 71510
Shock Absorbers & Shock AccessoriesIcon Suspension 1.75 – 3 Inch Front Remote Reservoir Coilover Shock Kit – 71510
- Front remote reservoir coilover for a 1.75 to 3 inch lift, for 2015–2022 Chevrolet Colorado and GMC Canyon
- 2.5 inch shock body with increased piston area
- Remote reservoir for steady damping during heavy use
- Vehicle-specific valving for a sport-tuned feel
- Part number ICO71510
SKU: ICO71510 -
Shock Absorbers & Shock Accessories
Icon Suspension 1.75 – 3 Inch Front 2.5 Coilover Shock Kit – 71010
Shock Absorbers & Shock AccessoriesIcon Suspension 1.75 – 3 Inch Front 2.5 Coilover Shock Kit – 71010
- Front 2.5 coilover kit for a 1.75 to 3 inch lift, fits 2015–2022 Chevrolet Colorado and GMC Canyon
- Hydraulic damping in an adjustable coilover layout
- Complete installation hardware included
- Recommended tire 285/75R16 on 16×8 wheels with 4.5 inch back spacing
- Part number ICO71010
SKU: ICO71010 -
Shock Absorbers & Shock Accessories
Icon Suspension 0-2 Inch Lift Rear Shock 2.0 Aluminum Series – 76526
Shock Absorbers & Shock AccessoriesIcon Suspension 0-2 Inch Lift Rear Shock 2.0 Aluminum Series – 76526
- Rear shock for a 0 to 2 inch lift, fits Chevrolet Silverado and GMC Sierra 1500 and Yukon models
- Premium 5WT shock oil and a one-piece linear and digressive piston
- 5/8 inch polished steel shaft
- Aluminum body and reservoir tubing
- Part number ICO76526
SKU: ICO76526 -
Shock Absorbers & Shock Accessories
Icon Suspension 0 -3 Inch Rear 2.0 Aluminum Series Remote Reservoir Shock – 216522R
Shock Absorbers & Shock AccessoriesIcon Suspension 0 -3 Inch Rear 2.0 Aluminum Series Remote Reservoir Shock – 216522R
- Rear remote reservoir shock for a 0 to 3 inch lift, fits 2003–2013 Dodge and Ram 2500 and 3500 trucks
- 2.0 Aluminum Series with hydraulic damping and gas charge
- Fully rebuildable and revalveable
- Direct-fit rear position
- Part number ICO216522R
SKU: ICO216522R -
Shock Absorbers & Shock Accessories
Icon Suspension 0 -2 Inch Rear 2.0 VS Aluminum Shock – 76550
- Rear 2.0 VS aluminum shock for 0 to 2 inch lift on 2015–2022 Chevrolet Colorado and GMC Canyon
- Vehicle-specific valving for on- and off-road performance
- Rebuildable and revalveable
- Includes all required hardware
- Part number ICO76550
SKU: ICO76550
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.



