Overview
The Skyjacker Softride Hydro H7063 is a hydraulic shock absorber for suspension lift setups, sold individually. It is rated for a 6-8 suspension lift, and the height change comes from the lift kit, since shocks do not lift the vehicle.
The Softride Hydro uses a heavy-duty twin tube design with a 5/8 diameter hardened double chrome rod. It is firm enough for off-roading while still giving a good street ride.
Key features
- Multi-stage velocity sensitive valving
- 5/8 inch diameter hardened double chrome rod
- Internal rebound bumper and oversize piston head
- Tough polyurethane bushings, red
- Variable resistance with an expanded fluid reservoir
- Heavy-duty twin tube construction
- Hydraulic action, not gas charged
- White paint finish with minimum 240-salt protection.
Matching the shock to your lift
A shock does not raise the vehicle, so the height change comes from the suspension kit paired with it. The shock’s job is to control how the springs and axle move at the new ride height. Before buying, check the kit you already have or plan to install, and make sure its lift falls within the range this shock is rated for.
Because this shock is sold individually, plan the number of positions you replace before ordering. Replacing shocks along with a lift is common practice, since older dampers were matched to the stock height. Look for leaking fluid, worn bushings and unusual noise during the inspection. Keep the boot and bushings intact so dirt does not reach the rod.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7063 |
| UPC | 803696140537 |
| Shock series | Hydro Series |
| Damping | Hydraulic, not gas charged |
| Lift range | 6-8 suspension lift. |
| Rod | 5/8 inch diameter, hardened, double chrome |
| Bushings | Red polyurethane |
| Boot | Red, included |
| Finish | White paint, minimum 240-salt protection |
| Warranty | Limited lifetime. |
| Sold as | Individually |
Vehicle fitment
Fit depends on your vehicle’s year, model and trim, along with the lift height, since this shock is rated for a 6-8 suspension lift.
Check your vehicle’s year, model and trim against the lift height before buying, and make sure the lift falls in the 6-8 range.
Installation notes
Since shocks do not lift the vehicle, the height change comes from the suspension kit you pair this with. Shocks are sold individually, so count the positions you are replacing before ordering. Use jack stands and wheel chocks while you swap each shock.
What’s included
One Skyjacker Softride Hydro shock absorber with red polyurethane bushings and a red boot.
Not included: the suspension lift kit, which sets the height change for this shock.







