A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
Leaf springs carry the weight of the axle on many trucks, Jeeps and classic 4x4s, and this branch of the Suspension section lists front and rear packs in factory-height, lifted and heavy-duty versions. Skyjacker, ARB, Pro Comp, Tuff Country and Crown Automotive appear most often. Use the product pages to compare lift height, spring position, bushing details and part numbers, then compare the products below.
Leaf Spring
Showing 1–12 of 278 resultsSorted by popularity
-
-
Leaf Spring
Trail Gear 4 Inch Lift Super Flex Leaf Springs – 110011-1-KIT
- Trail Gear 110011-1-KIT 4 inch lift front super flex leaf spring pair
- Fits 1984-1995 Toyota 4Runner and 1979-1995 Toyota Pickup
- Six-leaf pack rated at 220 lbs per inch
- New polyurethane bushings and a left side spring pad included
SKU: TGI110011-1-KIT -
-
-
-
Leaf Spring
Tuff Country Leaf Spring 3 Inch Lift – 19370
- Single rear leaf spring for a 3 inch lift on Chevrolet and GMC K10, K20 and V-series trucks
- Fits 1973–1991 Chevrolet and GMC pickups, Suburbans, Blazers and Jimmys
- Tapered, snub rolled and Teflon padded
- Polyurethane bushings included
SKU: T/C19370 -
-
-
Leaf Spring
Trail Gear Heavy-Duty Front 4″ Leaf Springs – 110222-1-KIT
- Heavy-duty front leaf springs for a 4 inch lift on Toyota trucks
- Fits 1979–1995 Toyota Pickup, 1985–1995 4Runner and 1995–2004 Tacoma
- Sold as a pair with polyurethane bushings
- Lift height range 0 to 4.99 inches
SKU: TGI110222-1-KIT
What leaf springs do
A leaf spring is a stack of curved steel plates that supports the vehicle, locates the axle and absorbs bumps. Heavy-duty trucks, older Jeeps such as the CJ and YJ, and many pickups use them front, rear or both. Because the spring also positions the axle, a worn or sagging pack affects ride height, handling and load capacity.
Replacement versus lift springs
Factory-height replacements restore factory ride when the original arch has flattened. Lift springs are built with extra arch to raise the vehicle, with listings here ranging from about 1.5 inches to 8 inches. Softer, multi-leaf or progressive designs improve ride quality, while heavier or extreme-duty packs favor load carrying and towing. A lighter spring pack on a truck that regularly hauls or tows can bottom out, so match spring rate to how the vehicle is used.
Details to check before choosing
- Position: front or rear, and whether it is a single spring or sold as one of a pair. Many listings are sold each, so you may need two.
- Bushings: some springs include them, others list a recommended bushing part number separately.
- Lift height: this is a nominal figure and the final height depends on vehicle weight, load and condition of other parts.
- Number of leaves and rate: affects ride firmness and capacity.
- Drivetrain related parts: a taller spring may call for shock extensions, longer brake lines, and driveline or pinion angle correction.
Installation notes
Replace springs in axle pairs to keep ride height even. Support the vehicle on rated jack stands, never on the springs or a jack alone. Fit new U-bolts and tighten shackle and spring-eye hardware to specification with the vehicle's weight on the suspension, which avoids bushing preload. Have an alignment and a driveline check done afterward. Professional installation is wise if you are not experienced with suspension work, since a loose spring or axle can be dangerous.
It helps to understand how spring design affects behavior. A multi-leaf pack with many thin plates tends to ride more softly and resists a harsh feel, but it can sag sooner under constant load. A pack with fewer leaves, often called a softride or parabolic style, reduces friction between plates and gives a smoother ride with less stiction. Heavier packs with added leaves carry more weight and resist squat when towing, at the cost of a firmer ride when unloaded.
Wear items matter just as much as the springs. Inspect shackles, hangers, spring eye bolts, center pins and U-bolts whenever you service the suspension, and replace any that are bent, cracked or worn. Rust between leaves and sagging at one corner are common signs that a pack is due for replacement. Keep in mind that a truck that has been regularly overloaded may need a heavier pack, not just a like-for-like replacement, and that mixing different spring rates side to side makes the vehicle lean and handle unpredictably.
Confirming fitment
Leaf spring part numbers are specific to year, make, model, cab and bed configuration, and sometimes axle type. Verify your exact application and the manufacturer's specifications before choosing a product below.
Related guides
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
- Traction Bars vs Ladder Bars: Stopping Axle Wrap
Traction bars vs ladder bars: what axle wrap is, how each design stops it, Pro Comp, Fabtech and Tuff Country fitment, alternatives and install…
Popular Leaf Spring brands
- Skyjacker (109)
- ARB 4x4 Accessories (43)
- Pro Comp Suspension (38)
- Tuff Country (24)
- Crown Automotive (15)
- Omix-Ada (13)
- Rubicon Express (12)
- Fabtech (11)
- Trail Gear (8)
- Rancho (7)
- Icon Suspension (3)
- Genuine Packages (1)
Leaf Spring FAQ
Do leaf springs need to be replaced in pairs?
Yes, it is best practice. Replacing only one side can leave uneven ride height and handling, because the new spring will have a different arch and rate than the worn one. Replacing both sides on the same axle keeps the vehicle level.
Are leaf springs sold as a single spring or a pair?
Many listings are sold each, with notes such as order two for a pair. Read the product page carefully for quantity wording, then order the number you need for the axle. Some product descriptions also say whether bushings are included.
Will new leaf springs lift my truck?
Only if they are lift springs. Stock-replacement packs restore factory height, while lift springs have extra arch for a stated increase. Actual height varies with vehicle weight and load, and you may need extended shocks, brake lines or driveline corrections.
Do I need an alignment after changing leaf springs?
An alignment is a good idea, especially on the front axle, and the rear thrust angle matters on some vehicles. Changing springs shifts axle position slightly, so have alignment and driveline angles checked after installation.












