Overview
The Skyjacker S40FS is a single front leaf spring for the 1972–1980 International Scout II. It is rated for lifts from 0 to 4.99 inches and is built as a progressive multileaf pack from American steel.
The spring carries a load capacity equal to or greater than original equipment. Bushings are not included, and a limited lifetime warranty applies to the spring.
Key features
- Single front spring for the Scout II
- Progressive multileaf construction
- Load capacity at or above original equipment spring levels
- American steel
Installing a Softride spring
A leaf spring carries the weight of the front axle and controls how the axle moves over bumps. On a Scout II, the spring also sets ride height once a lift is added, so the spring and its mounting hardware work together. A progressive multileaf pack softens the first part of its travel and firms up as load increases, which suits a vehicle used on both highways and rough trails.
When replacing a spring, inspect the shackle, the front bolts and the bushing sleeves at the same time. Worn bushings let the axle wander and can make a new spring feel loose. Many owners replace the shackle kit with the spring so the new part is not held by worn hardware.
- Check shackle pivots for play before installation
- Confirm the spring eye bushings seat without force
- Re-torque mounting bolts after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYS40FS |
| Position | Front |
| Spring quantity | Single |
| Lift height range | 0 to 4.99 inches |
| Bushings | Not included |
| Warranty | Limited lifetime |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1972–1980 International Scout II in Base, SS2, Terra, Traveler and XLC trims.
Scout models outside these years are not covered. Confirm your vehicle’s year, model and trim before ordering.






