Select your vehicle

Skyjacker Softride Leaf Spring – JP40FS

Skyjacker

$223.47In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 2:00 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Single front Softride leaf spring, rated for 0 to 4.99-inch lifts
  • For 1974–1983 Jeep Cherokee and Wagoneer SJ, 1984–1991 Grand Wagoneer and 1974–1988 J10 and J20 pickups
  • American steel with shot-peened leaves
  • Part number SKYJP40FS, bushings not included

Description

Overview

The JP40FS is a single front Softride leaf spring for 1970s and 1980s Jeep trucks and SUVs. It fits the 1974–1983 Jeep Cherokee (SJ), the 1974–1983 Jeep Wagoneer (SJ), the 1984–1991 Jeep Grand Wagoneer (SJ), the 1974–1988 Jeep J10 and J20 pickups, and the 1983 Jeep Cherokee Wide Track Chief.

The leaves are made from American steel and shot-peened with hardened steel pellets at high velocity. Shot peening compresses the leaf surface, which increases tensile strength and supports more wheel travel and ride quality without giving up spring life. The lift range is 0 to 4.99 inches, and bushings are not included.

Key features

  • Single front leaf spring for 0 to 4.99-inch lifts
  • American steel leaves
  • Each leaf shot-peened for added surface strength
  • Bushings not included

Front spring setup on older Jeeps

Front leaf springs on older Jeep SJ and J-series trucks carry the weight of the front axle and steer the ride height, so their condition affects steering feel and tire wear. Over the years, the eye bushings and shackles tend to wear, which lets the spring move more than it should. Replacing the bushings at the same time as the spring keeps the front end tight and the spring centered on its mounts.

Before installing, check the shock length, bump stops and steering linkage, since a change in front ride height can alter their working range. Once the spring is in, the front axle should be checked for correct caster and alignment. Parts that are exposed to road salt and moisture on these trucks also benefit from a careful inspection during the job.

  • Replace eye bushings and shackles with the spring
  • Check U-bolt torque after the first drive
  • Inspect shock length against the new ride height
  • Look for cracked or sagging leaves at each service

Specifications

Brand Skyjacker
Part number SKYJP40FS
Position Front
Spring quantity Single
Lift height range 0 to 4.99 inches
Material American steel
Bushings Not included
Fitment type Direct fit

Vehicle fitment

It fits the 1983 Jeep Cherokee Wide Track Chief, the 1974–1983 Jeep Cherokee (SJ) in Base, Chief, Pioneer, S and Wide Track trims, the 1974–1983 Jeep Wagoneer (SJ), the 1984–1991 Jeep Grand Wagoneer (SJ), and the 1974–1988 Jeep J10 and J20 pickups.

Later Cherokee models, including the XJ, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Fitment

VehicleYearsTrims
Jeep Cherokee1983Wide Track Chief
Jeep Cherokee (SJ)1974–1983Base, Chief, Pioneer, S, Wide Track
Jeep Grand Wagoneer (SJ)1984–1991Base, Limited
Jeep J101974–1988Base
Jeep J201974–1988Base
Jeep Wagoneer (SJ)1974–1983Base, Brougham, Custom, Limited

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the JP40FS fit a 1982 Jeep Cherokee?

Yes. It fits the 1974–1983 Jeep Cherokee SJ, so a 1982 Cherokee SJ falls within the covered years. Confirm your trim before ordering, since fit covers Base, Chief, Pioneer, S and Wide Track.

Does the JP40FS include bushings?

No. Bushings are not included with the spring, so source them separately before installing. The lift range is 0 to 4.99 inches, and the leaves are American steel.

Why is the JP40FS shot-peened?

Shot peening compresses the surface of each leaf, increasing its tensile strength. That lets the spring deliver more wheel travel and ride quality while keeping spring life intact.

Why replace bushings when installing a new leaf spring?

Old bushings are often worn or seized, and new ones keep the spring eye tight and quiet. Replacing them with the spring keeps alignment and ride consistent and reduces wear on the new spring.

How often should front leaf springs be inspected?

Inspect them at every oil change or tire rotation for cracked leaves, sag and loose U-bolts. Rough roads and off-road use increase wear, so check more often under those conditions.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon