Overview
The Trail Gear heavy-duty front leaf spring kit (part number TGI110222-1-KIT) is a pair of front springs for Toyota trucks. It is a 4 inch front heavy duty spring with a lift height range of 0 to 4.99 inches, and it is a direct fit.
It fits the 1979–1995 Toyota Pickup, the 1985–1995 Toyota 4Runner and the 1995–2004 Toyota Tacoma. Polyurethane bushings come with the pair, so the springs are ready for the front eye and shackle points.
Key features
- Heavy duty front leaf springs
- Sold as a pair
- Polyurethane bushings included
- Lift height range 0 to 4.99 inches
- Front position
- Direct fit
Matching springs to your lift
Leaf springs carry the weight of the truck and set its ride height, so a lift change affects more than the look of the front end. A taller spring changes the angle of the axle and the length of the driveline, and the shock and brake line lengths may need to be checked. Front lift also changes caster and camber, which is why an alignment is usually needed after the springs are fitted.
Spring eyes and shackles wear over time, and new bushings help keep the spring pack moving freely. When a truck has been lifted, the bump stops and track bar often deserve a look at the same time, since the front end is working through a different range of travel. Inspect the front spring pack for cracked or broken leaves, sagging at one corner, and rust that flakes off between the leaves.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI110222-1-KIT |
| Position | Front |
| Quantity | Pair |
| Bushings | Polyurethane included |
| Lift height range | 0 to 4.99 in |
| Fitment | Direct fit |
Vehicle fitment
Trail Gear lists these front springs for the 1985–1995 Toyota 4Runner in the DLX and SR5 trims, the 1979–1995 Toyota Pickup in the Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo trims, and the 1995–2004 Toyota Tacoma in the Base, DLX, Limited, Pre Runner, S-Runner and SR5 trims.
The list does not include the Tacoma from 2005 onward or any rear spring position. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift range runs from 0 to 4.99 inches, so the springs are not sized for a single height. Measure the lift on your truck before ordering and confirm the front axle layout, since the kit is for the front position only.
What’s included
A pair of front leaf springs with polyurethane bushings.








