Overview
The Trail Gear leaf spring kit (part number TGI300826-1-KIT) is made for the 1995–2004 Toyota Tacoma. It provides a 3 inch lift with a front or rear spring, and each kit includes one spring.
The spring pin is set up for a spring-under configuration. Suzuki Samurai is not a confirmed application for this kit, so the Tacoma is the vehicle to match.
Key features
- 3 inch lift
- Military wrap on the fixed end
- Spring pin set up for a spring-under configuration
- Each kit includes one front or one rear spring
- Requires use of rear shocks with longer travel
Pairing springs and shocks
A spring upgrade and a shock upgrade are closely linked. When a spring raises the body, the shock is asked to work through a longer stroke, and a shock with the right travel helps keep the wheel in contact with the ground on uneven trail. Shocks that bottom out early can damage mounts and bushings, so the shock choice should be made with the spring choice in mind.
Military wrap ends are a common choice on leaf springs because they allow the spring to pivot at the fixed end. Check the bushings and mounting hardware at the fixed and shackle ends at each service, and look for cracks around the spring pin. A spring pin set for a spring-under layout should sit square and tight before the truck is driven on rough ground.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | TGI300826-1-KIT |
| Position | Front or rear, per kit |
| Lift | 3 in |
| Wrap | Military wrap on fixed end |
| Spring pin | Set up for spring under configuration |
| Shocks | Rear shocks with longer travel required |
| Fitment | Direct fit |
Vehicle fitment
The kit fits the 1995–2004 Toyota Tacoma in the Base, DLX, Limited, Pre Runner, S-Runner and SR5 trims.
Suzuki Samurai is not a confirmed fit for this kit. No other Toyota model or year is confirmed, so confirm your year, model and trim before ordering.
What’s included
One front or one rear leaf spring, depending on the kit ordered. No bushings or hardware are included.







