Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Lift Kits
Showing 97–108 of 1736 resultsSorted by popularity
-
Lift Kits
Rubicon Express 3.5″ Standard Progressive Coil Suspension Lift Kit with Monotube Shocks – RE7122PM
Lift KitsRubicon Express 3.5″ Standard Progressive Coil Suspension Lift Kit with Monotube Shocks – RE7122PM
- Fits the 2007–2018 Jeep Wrangler (JK) 2-door trims
- 3 to 3.5 inch standard progressive coil suspension lift
- Monotube shocks at the front and rear, included
- Replacement lift springs, extended bump stops, longer brake lines
- Part number R/ERE7122PM (RE7122PM)
SKU: R/ERE7122PM -
Lift Kits
Rubicon Express 3.5″ Standard Progressive Coil Suspension Lift Kit – RE7122P
- Fits the 2007–2018 Jeep Wrangler (JK) 2-door trims
- 3-4 inch standard progressive coil suspension lift
- Replacement lift springs and extended bump stops
- Longer front and rear stainless steel brake lines
- Part number R/ERE7122P (RE7122P)
SKU: R/ERE7122P -
Lift Kits
Rubicon Express 3.5″ Standard Coil Lift Kit with Piggyback Monotube Resi Shocks – JL7142PB
Lift KitsRubicon Express 3.5″ Standard Coil Lift Kit with Piggyback Monotube Resi Shocks – JL7142PB
- Fits 2018–2026 Jeep Wrangler (JL), 2-door and 4-door trims
- 3.5 inch coil lift kit; lift height range of 0-3.5 inches
- Includes front and rear monotube reservoir shocks
- Keeps the control arms and other components; listed tire size 37 inches
SKU: R/EJL7142PB -
Lift Kits
Rubicon Express 3.5″ Standard Coil Lift Kit with Piggyback Monotube Resi Shocks – JL7102PB
Lift KitsRubicon Express 3.5″ Standard Coil Lift Kit with Piggyback Monotube Resi Shocks – JL7102PB
- Fits the 2018–2026 Jeep Wrangler (JL), 2-door and 4-door
- 3-4 inch standard coil lift kit
- Piggyback monotube reservoir shock at the front
- Control arms and other components retained
- Part number R/EJL7102PB (JL7102PB)
SKU: R/EJL7102PB -
Lift Kits
Rubicon Express 3.5″ Standard Coil Lift Kit with Monotube Shocks – JL7142M
- Fits the 2018–2026 Jeep Wrangler (JL) trims listed above
- 2.5 to 3 inch standard coil lift with monotube shocks
- Front and rear monotube shocks, included
- Lift height range of 0 to 3.5 inches
- Part number R/EJL7142M (JL7142M)
SKU: R/EJL7142M -
Lift Kits
Rubicon Express 3.5″ Standard Coil Lift Kit with Monotube Shocks – JL7102M
- Fits the 2018–2026 Jeep Wrangler (JL) in the listed Rubicon, Sport, Sport S and Unlimited trims
- 3-4 inch standard coil lift with monotube shocks
- Front and rear monotube shocks, included
- Lift height range is 4 to 5.5 inches
- Part number R/EJL7102M (JL7102M)
SKU: R/EJL7102M -
Lift Kits
Rubicon Express 3.5″ Lift Kit with Twin Tube Shocks – RE7142T
- Fits the 2007–2018 Jeep Wrangler (JK) Unlimited 4-door trims
- 3.5-inch standard lift with twin tube shocks
- Suspension allows 33-inch or 35-inch tires
- Can be upgraded to a 3.5 to 4.5 inch Super-Flex or Extreme-Duty Long Arm system
- Part number R/ERE7142T (RE7142T)
SKU: R/ERE7142T -
Lift Kits
Rubicon Express 3.5 Inch Standard Coil Lift Kit with Twin Tube Shocks – JL7142T
- Fits the 2018–2026 Jeep Wrangler (JL), 2-door and 4-door
- 3.5-inch standard coil lift with twin tube shocks
- Twin tube shocks at the front and rear, included
- Control arms and other components retained
- Part number R/EJL7142T (JL7142T)
SKU: R/EJL7142T -
Lift Kits
Rubicon Express 3.5 Inch Standard Coil Lift Kit with Twin Tube Shocks – JL7102T
- Fits the 2018–2026 Jeep Wrangler (JL), 2-door and 4-door
- 3.5-inch standard coil lift with twin tube shocks
- Twin tube shocks at the front and rear, included
- Control arms and other components retained
- Part number R/EJL7102T (JL7102T)
SKU: R/EJL7102T -
Lift Kits
Rubicon Express 3.5 Inch Standard Coil Lift Kit with FOX Performance Shocks – JL7102FP
- Fits the 2018–2026 Jeep Wrangler Unlimited (JL) 4-door trims
- 3-3.5 inch standard coil lift with FOX Performance shocks
- FOX shocks at the front and rear, included
- Control arms and other components retained
- Part number R/EJL7102FP (JL7102FP)
SKU: R/EJL7102FP -
-
Lift Kits
Rubicon Express 3.5 Inch Standard Coil Lift Kit – JL7102
- Fits the 2018–2026 Jeep Wrangler (JL), 2-door and 4-door
- 3.5-inch standard coil lift with a 0 to 3.5 inch lift height range
- Control arms and other components are retained
- Shocks not included; 37-inch tire size listed
- Part number R/EJL7102 (JL7102)
SKU: R/EJL7102
What a lift kit includes
A lift kit is a bundle of parts that raises the body or frame relative to the axles. Listings in this category show how much the contents vary. Some kits are little more than spacers and bump stops, while others add replacement coil springs, extended sway bar links, track bar brackets, steering drop components and matched shocks.
Lift height is the headline number, but it is only part of the story. A kit sold as 3.5 inch, 4 inch or 6 inch describes nominal lift, and the actual change depends on the vehicle, tire size and how much it sags with weight.
Short arm, long arm and spacer designs
Design matters more than height. Common types you will see here:
- Spacer and strut kits raise the ride height cheaply and keep factory geometry, which suits moderate lifts.
- Short arm kits keep the factory control arm mounting points and replace springs, arms and shocks. They are simple to install and work well for daily drivers.
- Long arm and 4-link kits relocate the arm mounts with crossmembers, giving better articulation and a flatter arm angle at the cost of more complex installation.
- Radius arm and drop bracket kits are common on solid-axle trucks and corrected geometry varies by model.
Kits with a stage or number in the name usually add components step by step, so read the contents list rather than assuming two kits of the same height are equivalent.
Shocks and geometry correction
Raising a vehicle changes control arm angles, driveline angles and steering geometry. Good kits include correction parts such as caster-correcting bushings, cam bolts for pinion angle, drop brackets, a high steer or drag link, and extended brake lines. If a kit leaves these out, plan to buy them separately.
Shocks are either included or sold separately. Twin tube, monotube and reservoir shocks differ in heat handling and ride feel. Confirm the shock lengths suit the lift height, since a shock that is too short can limit travel and one that is too long can bottom the bump stops.
Installation and compatibility
Lift kits are vehicle specific. Confirm fitment for your exact year, make, model, cab or door configuration, drivetrain (2WD or 4WD) and engine, then compare against the manufacturer's specifications. Part numbers often change between model years.
Suspension, steering and brake line work is safety critical. Professional installation is a sound choice unless you have the tools and experience, and every fastener should be tightened to the specified torque with the vehicle at ride height. Plan on an alignment after the lift, plus a check of headlight aim, speedometer calibration if you change tire size, and driveshaft angles.
Lift height, bumper height and tire rules vary by state, so check local regulations.
Maintenance and common mistakes
A lifted suspension needs more attention than a stock one. Recheck every suspension bolt after the first 100 miles or so, because bushings settle and fasteners can lose torque. Grease any fittings on control arms and ball joints on the schedule the manufacturer gives, and inspect bump stops, shock mounts and brake lines at each oil change.
- Do not pick a lift height first and shop for parts second. Start with the tire size you want and the use you have in mind.
- Do not skip extended brake lines or a driveshaft check on taller lifts.
- Do not mix leftover parts from different kits, since spring rates and arm lengths are matched within a kit.
- Remember that a taller vehicle behaves differently in corners and in emergency maneuvers, so adjust your driving.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Lift Kits brands
- Pro Comp Suspension (613)
- Rubicon Express (338)
- Fabtech (162)
- Rough Country (98)
- Tuff Country (90)
- Skyjacker (80)
- TeraFlex (64)
- Daystar (62)
- ReadyLift (59)
- Trail Master (40)
- Genuine Packages (26)
- ARB 4x4 Accessories (24)
Lift Kits FAQ
How much lift do I need for 35 inch tires?
It depends on the vehicle, backspacing and trimming. Many solid-axle vehicles clear 35s with about 3.5 to 4 inches of lift plus some trimming, while independent front suspension trucks vary. Check the kit manufacturer's tire size guidance for your exact model.
Do I need an alignment after installing a lift kit?
Yes. Changing ride height alters caster, camber and toe, so an alignment is required after installation. Headlight aim and driveline angles should also be checked, and a high steer or geometry correction parts may be needed.
Is a long arm kit better than a short arm kit?
Long arm kits generally improve articulation and geometry at taller lifts but cost more and are harder to install. Short arm kits are simpler and fine for moderate lifts and mostly street use.
Will a lift kit affect my ride and fuel economy?
Usually yes. A taller, heavier setup raises the center of gravity and increases drag, and bigger tires add weight and rolling resistance. Quality shocks and correct alignment help the ride but cannot fully offset those changes.




