Overview
The Rubicon Express JL7142M is a 2.5 to 3 inch standard coil lift kit with monotube shocks for the 2018–2026 Jeep Wrangler JL. It is a direct fit for the Rubicon, Sport and Sport S 2-door models and the Unlimited Moab, Rubicon, Sahara, Sport and Sport S 4-door models.
The coil springs sit at the rear and monotube shocks are included at both ends. The specifications list a 37-inch tire size and a lift height range of 0 to 3.5 inches, with the control arms and other components retained.
The package is a budget-minded system aimed at a smooth ride on the road and the trail. The shocks are monotube at both ends.
Key features
- Monotube shocks at the front and rear, included
- 2.5 to 3 inch standard coil lift
- The control arms and other components are retained.
- Coil spring rear lift method
- Direct fit to the listed Rubicon, Sport, Sport S and Unlimited trims
Shock and spring setup
Coil springs raise the body by changing the spring height at each corner, so the lift is set by the spring rather than a spacer. Monotube shocks are often used with a coil lift because they handle heat well on longer trail runs, and the damping must match the new ride height so the shocks are not compressed or extended beyond their range. Inspect the sway bar links and brake hoses after the install, since both can be affected by a change in ride height.
Because the control arms stay in place, the factory geometry is largely kept, but the new height still changes the caster and camber settings, so an alignment should follow the install. Check the brake lines and shock mounts for stretch, and inspect the coil springs for sag after the first few weeks of driving. Replace worn bushings at the same time if the arms are being inspected.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EJL7142M (JL7142M) |
| Kit type | Standard coil lift kit |
| Lift | 2.5 to 3 inch suspension lift |
| Lift height range | 0 to 3.5 inches |
| Tire size | 37 inches |
| Front shocks | Monotube |
| Rear shocks | Monotube |
| Rear lift method | Coil springs |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler JL Rubicon, Sport and Sport S 2-door models, and the 2018–2026 Unlimited Moab, Rubicon, Sahara, Sport and Sport S 4-door models.
Other 2-door trims and earlier Wrangler generations are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Monotube shocks with a coil lift change the damping and the ride height, so the shock length should be checked, and the alignment set, after installation.
What’s included
Monotube shocks at both ends are included with the coil lift components. The control arms and other components are retained.













