Overview
The Rubicon Express JL7142 is a 3.5-inch standard coil lift kit for the 2018–2022 Jeep Wrangler (JL). The rear lift uses coil springs, and the control arms and other components remain in place.
It is a budget-minded suspension package designed for both road and trail use. The lift height range is 0 to 3.5 inches, so 3.5 inches is the top of that range. The kit is made for 37 inch tires, and the shocks are not included.
Key features
- 3.5 inch standard lift
- Rear coil spring lift method
- Control arms and other components retained
- Budget-minded package designed for on-road and trail use
Budget lifts and what to add
A budget coil spring lift is a practical way to add ground clearance and room for larger tires, but it leaves some parts for the owner to plan. Because the shocks are not included, the ride and damping depend on the shocks chosen. Pick shocks rated for the new ride height and spring rate, and keep the rest of the suspension in good condition so the lift performs as expected.
Before the install, check the brake lines, the driveline and the wiring for length at full droop. Plan for a wheel alignment after the lift and for tire clearance testing at full compression. Over time, look at the springs, the control arm bushings and the shock mounts for wear, since loose or worn parts can affect steering and stability.
- Select shocks rated for the new height
- Measure driveline angles after installation
- Inspect control arm bushings periodically
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JL7142 |
| Suspension type | Lift kit |
| Lift height range | 0 to 3.5 in |
| Rear lift method | Coil springs |
| Rear lift component | Coil spring |
| Tire size | 37 in |
| Shocks included | No |
Vehicle fitment
It is a direct fit for the 2018–2022 Jeep Wrangler (JL), in two-door and four-door models.
Earlier Wrangler generations and the Gladiator are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a lift kit, the alignment and driveline angles should be checked once the kit is installed. Shocks are not included, so choose shocks suited to a 3.5 inch lift before the install.
What’s included
The rear coil spring lift components.
Not included: shocks, which are not part of the kit.
