Overview
The Rubicon Express JL7102 is a 3.5-inch standard coil lift kit for the 2018–2026 Jeep Wrangler JL. It is a direct fit for the 2-door and 4-door JL trims, using coil springs at the rear.
The kit is a budget-minded standard system designed for a smooth ride on the road and on the trail. It is sized for 37-inch tires.
Shocks are not included with this part. The lift height range is 0 to 3.5 inches, and the factory control arms and other components are retained.
Key features
- 3.5-inch standard coil lift
- Coil spring rear lift method
- Control arms and other components are retained.
- A budget-minded design.
- Direct fit to the listed 2-door and 4-door JL trims
Coil lift ride and driveline
A coil lift raises the body by changing the rear spring height, which leaves the rest of the chassis largely as it was. That makes the lift simpler to live with than a full arm replacement, but the change still moves the driveline angles and the ride height. Before going to larger tires, consider the load the rear springs carry and whether a heavier bumper or rear rack changes the stance.
Check the driveline for vibration after installation, and inspect the U-joints for play at the next service. Look at the brake lines and the rear shock mounts for clearance at full droop and full compression. Worn bump stops or sagging springs are signs the lift needs attention. Keeping shocks matched to the new height helps the truck stay controlled.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EJL7102 (JL7102) |
| Kit type | Standard coil lift kit |
| Lift | 3.5 inch |
| Lift height range | 0 to 3.5 inches |
| Tire size | 37 inches |
| Rear lift method | Coil springs |
| Rear lift component | Coil spring |
| Shocks included | No |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler (JL) 2-door trims, including the 80th Anniversary, Freedom, Islander, Rubicon, Sport and Sport S models, and the 4-door trims, including the Unlimited Freedom, High Altitude, Islander, Rubicon, Sahara, Sport and Willys models, plus the Rubicon 392.
Earlier Wrangler generations such as the JK and TJ are not covered, and the Gladiator is not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 3.5-inch coil lift changes the ride height and the driveline angles, so the alignment and driveline should be checked after installation. Because shocks are not included, the shock length also needs checking.
What’s included
The kit is a standard coil lift that retains the control arms and other components. Shocks are not included.
Not included: shocks.














