Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Lift Kits
Showing 1021–1032 of 1736 resultsSorted by popularity
-
Lift Kits
Fabtech 3 Inch Budget Lift Kit w/Stealth Shocks – K4048M
- Lists the 2007–2018 Jeep Wrangler JK Unlimited models
- 3-inch budget system with four American made coil springs
- Designed to clear 35-inch tall tires
- Front and rear Stealth monotube shocks included
- Bump stops, sway bar links, brake hose extension and cable brackets in one box
SKU: FABK4048M -
Lift Kits
Fabtech 5 Inch Radius Arm Lift Kit w/Dirt Logic SS Shocks – K3144DL
- Lists the 2013–2018 Ram 3500 in its listed trims, non-dually models only
- 5-inch patented radius arm lift with Dirt Logic SS shocks
- Replacement front coil springs and rear block and U-bolt kit
- Trac bar relocation bracket, pitman arm and sway bar drops
- Adjustable alignment cam at the axle
SKU: FABK3144DL -
Lift Kits
Fabtech 5 Inch Basic Lift Kit w/Coil Springs & Performance Shocks – K3139
- Fabtech 5 inch basic lift kit with coil springs and performance shocks, part number K3139
- Straight front coil springs with patent pending angled lower mounts
- Dual stage rear coil springs
- Fitment: 2014–2018 Ram 2500, lift height range 5 to 6.99 inches
SKU: FABK3139 -
Lift Kits
Fabtech 5 Inch 4 Link Lift Kit w/Coil Springs & Stealth Shocks – K3089M
- Fabtech 5 inch 4 link lift kit with coil springs and Stealth monotube shocks, part number K3089M
- Lift height range 5 to 6.99 inches, front and rear
- 9-stage valving with a closed cell insert
- Fitment: 2013–2018 Ram 3500
SKU: FABK3089M -
Lift Kits
Fabtech 5 Inch Radius Arm Lift Kit w/Performance Shocks – K3070
- Lists the 2013–2018 Ram 3500 in its listed trims
- 5-inch radius arm lift with dimple die side plates
- Angular steel spacers keep the factory front spring bow
- Front track bar drop bracket and steel front bump extensions
- Rear block and U-bolt system with bump stop extensions
SKU: FABK3070 -
Lift Kits
Fabtech 5 Inch Radius Arm Lift Kit w/Performance Shocks – K3068
- Lists the 2014–2018 Ram 2500 in its listed trims
- 5-inch radius arm lift with dimple die side plates and angular steel spacers
- Steel front bump extensions in place of urethane
- Track bar drop brackets that center the axles
- Front and rear performance shocks included
SKU: FABK3068 -
Lift Kits
Fabtech 5 Inch Basic Lift Kit w/Performance Shocks – K3066
- Lists the 2014–2018 Ram 2500 in its listed trims
- 5-inch basic system with spacers and front bump extensions
- Front and rear performance shocks included
- Lift range 5 to 6.99 inches
- Tire fit and installation steps need confirming for your truck
SKU: FABK3066 -
-
Lift Kits
Fabtech 6 Inch Basic Lift Kit w/Rear Performance Shocks – K3055
- Lists the 2012–2015 Ram 1500 in its listed trims
- 6-inch basic Dodge 1500 system with steel coilover spacers in front
- Replacement performance coil springs and new upper and lower link arms at the rear
- Extended length steering knuckles for electronic stability control
- Rear performance shocks included
SKU: FABK3055 -
Lift Kits
Fabtech 6 Inch Performance Lift Kit w/Performance Shocks – K3000
- Lists the 2002–2005 Dodge Ram 1500 Laramie, SLT and ST
- 6-inch performance system for 4WD Ram 1500 with IFS technology
- Preinstalled rubber bushing for the Dodge lower control arm mount
- 1/4-inch differential skid plate and heavy duty tie rods
- Front and rear twin tube performance shocks
SKU: FABK3000
What a lift kit includes
A lift kit is a bundle of parts that raises the body or frame relative to the axles. Listings in this category show how much the contents vary. Some kits are little more than spacers and bump stops, while others add replacement coil springs, extended sway bar links, track bar brackets, steering drop components and matched shocks.
Lift height is the headline number, but it is only part of the story. A kit sold as 3.5 inch, 4 inch or 6 inch describes nominal lift, and the actual change depends on the vehicle, tire size and how much it sags with weight.
Short arm, long arm and spacer designs
Design matters more than height. Common types you will see here:
- Spacer and strut kits raise the ride height cheaply and keep factory geometry, which suits moderate lifts.
- Short arm kits keep the factory control arm mounting points and replace springs, arms and shocks. They are simple to install and work well for daily drivers.
- Long arm and 4-link kits relocate the arm mounts with crossmembers, giving better articulation and a flatter arm angle at the cost of more complex installation.
- Radius arm and drop bracket kits are common on solid-axle trucks and corrected geometry varies by model.
Kits with a stage or number in the name usually add components step by step, so read the contents list rather than assuming two kits of the same height are equivalent.
Shocks and geometry correction
Raising a vehicle changes control arm angles, driveline angles and steering geometry. Good kits include correction parts such as caster-correcting bushings, cam bolts for pinion angle, drop brackets, a high steer or drag link, and extended brake lines. If a kit leaves these out, plan to buy them separately.
Shocks are either included or sold separately. Twin tube, monotube and reservoir shocks differ in heat handling and ride feel. Confirm the shock lengths suit the lift height, since a shock that is too short can limit travel and one that is too long can bottom the bump stops.
Installation and compatibility
Lift kits are vehicle specific. Confirm fitment for your exact year, make, model, cab or door configuration, drivetrain (2WD or 4WD) and engine, then compare against the manufacturer's specifications. Part numbers often change between model years.
Suspension, steering and brake line work is safety critical. Professional installation is a sound choice unless you have the tools and experience, and every fastener should be tightened to the specified torque with the vehicle at ride height. Plan on an alignment after the lift, plus a check of headlight aim, speedometer calibration if you change tire size, and driveshaft angles.
Lift height, bumper height and tire rules vary by state, so check local regulations.
Maintenance and common mistakes
A lifted suspension needs more attention than a stock one. Recheck every suspension bolt after the first 100 miles or so, because bushings settle and fasteners can lose torque. Grease any fittings on control arms and ball joints on the schedule the manufacturer gives, and inspect bump stops, shock mounts and brake lines at each oil change.
- Do not pick a lift height first and shop for parts second. Start with the tire size you want and the use you have in mind.
- Do not skip extended brake lines or a driveshaft check on taller lifts.
- Do not mix leftover parts from different kits, since spring rates and arm lengths are matched within a kit.
- Remember that a taller vehicle behaves differently in corners and in emergency maneuvers, so adjust your driving.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Lift Kits brands
- Pro Comp Suspension (613)
- Rubicon Express (338)
- Fabtech (162)
- Rough Country (98)
- Tuff Country (90)
- Skyjacker (80)
- TeraFlex (64)
- Daystar (62)
- ReadyLift (59)
- Trail Master (40)
- Genuine Packages (26)
- ARB 4x4 Accessories (24)
Lift Kits FAQ
How much lift do I need for 35 inch tires?
It depends on the vehicle, backspacing and trimming. Many solid-axle vehicles clear 35s with about 3.5 to 4 inches of lift plus some trimming, while independent front suspension trucks vary. Check the kit manufacturer's tire size guidance for your exact model.
Do I need an alignment after installing a lift kit?
Yes. Changing ride height alters caster, camber and toe, so an alignment is required after installation. Headlight aim and driveline angles should also be checked, and a high steer or geometry correction parts may be needed.
Is a long arm kit better than a short arm kit?
Long arm kits generally improve articulation and geometry at taller lifts but cost more and are harder to install. Short arm kits are simpler and fine for moderate lifts and mostly street use.
Will a lift kit affect my ride and fuel economy?
Usually yes. A taller, heavier setup raises the center of gravity and increases drag, and bigger tires add weight and rolling resistance. Quality shocks and correct alignment help the ride but cannot fully offset those changes.
















