Overview
The Fabtech 5 inch 4 link lift kit with coil springs and Stealth shocks, part number K3089M, is a basic coilover kit for the front and rear. It lifts the vehicle 5 to 6.99 inches and fits the 2013–2018 Ram 3500.
Fabtech says its performance shocks are designed to work with each of its suspension systems to give superior ride control. The Stealth monotube shocks in this kit use high velocity 9-stage valving and a closed cell insert to reduce shock fade at high speeds.
Key features
- Basic coilover kit for the front and rear
- Coil springs with a 4 link suspension design
- Stealth monotube shocks, included with the kit
- High velocity 9-stage valving
- Closed cell insert to reduce shock fade at high speeds
Choosing a lift height
Lift height affects how far the axles move and how much the driveline angles change. A 4 link setup controls axle location with four control links, so the geometry stays more predictable than with leaf springs once the truck is raised. Higher lift usually means longer driveline angles and more questions about tire clearance, so match the height to the tires and the use you plan.
Trucks that tow or carry heavy loads should have the new ride height checked against the hitch, the bumper and the brake lines. Coilover shocks and springs work together, so a shock with the right length matters for control. Routine checks include the control link bushings and the axle pinion angle after the first trips.
- Check the pinion angle after the install
- Inspect control link bushings at regular intervals
- Re-check brake line length and hitch clearance
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K3089M |
| UPC | 700007526861 |
| Kit type | Basic coilover kit, front and rear |
| Suspension | 4 link with coil springs |
| Shocks | Stealth monotube, included |
| Valving | High velocity 9-stage |
| Lift height range | 5 to 6.99 inches |
Vehicle fitment
The kit is made for 2013–2018 Ram 3500 trucks. Ram 2500 and Ram 1500 models are not covered, so check that your truck’s year, model and trim match before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 4 link lift changes the axle location and the driveline angles, so an alignment and a check of the driveline angles are needed after installation. Confirm the lift height against your tire and wheel fitment before ordering.
What’s included
Front and rear coil springs with the 4 link components and Stealth monotube shocks, as a basic coilover kit.









