Overview
The Fabtech K3055 is a 6-inch basic lift for the 2012–2015 Ram 1500. It is Fabtech’s IFS-based Dodge 1500 system, with extended length steering knuckles that keep the factory electronic stability control functioning.
The front lift comes from a steel coilover shock spacer system that keeps the stock ride characteristics. At the rear, replacement performance coil springs are fitted with new upper and lower link arms, which set the proper pinion angle without loss of ground clearance. Heavy duty 1/4-inch thick steel lower control arm crossmembers with an integrated front differential skid plate provide ground clearance and protect the drivetrain. Shocks are included.
Key features
- 6-inch lift height
- Extended length steering knuckles
- 1/4-inch thick steel lower control arm crossmembers
- Integrated front differential skid plate
- Steel coilover shock spacer system at the front
- Replacement performance coil springs and new link arms at the rear
Caring for a coilover spacer lift
A coilover spacer front paired with replacement coil springs in the rear changes how the suspension loads over time, so periodic checks matter more than on an unlifted truck. After the first stretch of driving, look over the link arm bushings, the crossmember bolts and the shock mounts. Torque hardware to the figure in the installation instructions and recheck it after rough trail runs. Pay attention to new clunks, uneven tire wear or a change in steering feel.
Driveline angles also change when the rear geometry is reset, so a driveshaft vibration after installation is worth investigating promptly. Keep the skid plate bolts tight, since they carry impacts that the crossmembers absorb. Consider an alignment check after the install, because caster and toe can drift as the new arms settle into place.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K3055 |
| UPC | 70000679621 |
| Lift height | 6 inches |
| Suspension type | Coil spring kit |
| Front lift | Steel coilover shock spacer system |
| Rear lift | Replacement performance coil springs with upper and lower link arms |
| Shocks | Rear performance shocks included |
Vehicle fitment
It fits the 2012–2015 Ram 1500 in the Big Horn, Express, Laramie, Laramie Limited, Laramie Longhorn, Lone Star, Outdoorsman, Rebel, SLT, Special Service, Sport and Tradesman models.
The list covers the Ram 1500 in 2012 through 2015 only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear link arms are included and set the pinion angle, so the rear geometry changes with the new arms. The stock ride is retained at the front.
What’s included
Steering knuckles, crossmembers, the front steel coilover shock spacer system, the front differential skid plate, replacement performance coil springs, new upper and lower rear link arms and rear performance shocks.









