Overview
The Fabtech K3000 is a 6-inch performance lift for the 2002–2005 Dodge Ram 1500 4WD, covering Laramie, SLT and ST trims. It uses IFS technology with extended length steering knuckles and arched crossmembers, and adds a rear lift with blocks, U-bolts and add-a-leafs.
The lower control arm bushings mount in the frame on this truck. A preinstalled vulcanized rubber bushing in the rear crossmember keeps the install quicker and supports a factory-like ride. The kit includes a 1/4-inch thick differential skid plate, impact struts, heavy duty tie rods, add-a-leafs and torsion bar mounts. Front and rear twin tube performance shocks are included, and shock boots are not included.
Key features
- 6-inch lift, range 5 to 6.99 inches
- Extended length steering knuckles
- Arched crossmembers
- Preinstalled vulcanized rubber lower control arm bushing
- 1/4-inch thick differential skid plate
- Front and rear twin tube performance shocks
Things to know about IFS lifts
IFS front suspension uses a different steering and suspension layout from a solid axle, so lift components must work with the knuckles and control arms as a set. Extended length steering knuckles and arched crossmembers keep the geometry in line with the new height. Tie rods and impact struts also help control steering and suspension travel.
The lower control arm bushing is a common wear point on lifted trucks. A rubber bushing that is preinstalled in the crossmember helps maintain positioning, but all bushings should be inspected as the suspension ages. Check the torsion bar mounts and differential skid plate after rough off-road use too.
- Inspect control arm bushings at each service
- Check tie rod ends for play
- Verify steering stop clearance after the install
- Re-check alignment after the first drives
- Look for wear on the impact struts
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K3000 |
| UPC | 70000583836 |
| Lift height | 6 inches (range 5 to 6.99 inches) |
| Suspension type | Knuckle |
| Rear lift method | Lift block, U-bolts and add-a-leaf |
| Tire and wheel fit | 35/12.50R18 on 18×9 with 4 1/2-inch backspacing, minor trimming |
| Shocks | Front and rear twin tube performance shocks |
| Shock boots | Not included |
Vehicle fitment
It fits the 2002–2005 Dodge Ram 1500, including the Laramie, SLT and ST models.
It is written for the 4WD Ram 1500 in those years only. Verify your year, model and trim before buying.
Installation notes
The lower control arm bushing is preinstalled in the rear crossmember, which Fabtech says makes the install quicker. The kit includes impact struts and heavy duty tie rods, so those parts are fitted during installation.
What’s included
Extended length steering knuckles, arched crossmembers, a 1/4-inch differential skid plate, impact struts, heavy duty tie rods, add-a-leafs, torsion bar mounts, a rear lift block and U-bolt kit, and front and rear twin tube performance shocks.
Not included: Shock boots.









