Overview
The Fabtech 5 inch Basic Lift Kit with coil springs and performance shocks, part number K3139, is a coil spring suspension system for the 2014–2018 Ram 2500. It is listed with a lift height range of 5 to 6.99 inches and comes with performance shocks.
Fabtech says its straight front coil spring design, paired with patent pending angled lower mounts, gives a smoother ride than the factory bowed spring. The lower spring rate is meant to keep the factory carrying capacity when it is needed, and the dual stage rear coil springs give a supple ride unloaded and handle factory carrying loads when required.
The factory springs are a high rate bowed style that rides stiff and reacts overactively to changing road conditions. The straight front design uses a lower spring rate for a smoother ride.
Key features
- Straight front coil spring design
- Patent pending angled lower mounts
- Dual stage rear coil springs
- Performance shocks included
- Lift height range of 5 to 6.99 inches
Before a coil spring lift
Coil spring lifts change how the front and rear axles sit and how the suspension loads under weight. Because the springs carry the vehicle’s weight, the rate and height of each spring affect ride height, steering feel and braking under load. Before buying, think about how the truck is used most: daily driving, towing or heavy hauling. Those habits shape whether a softer or stiffer setup suits you.
A lift also changes driveline angles and steering geometry, so most owners expect follow-up work. Expect a full alignment after the install, and check the brake lines and sway bar links for stretch as the new height settles. Shocks and bump stops are often replaced at the same time, because the new spring height changes how they travel.
- Driving style and typical loads
- Driveline angle and alignment checks
- Brake line length at the new ride height
- Sway bar end links and bump stops
- Wheel and tire clearance at full steering lock
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K3139 |
| UPC | 674866093461 |
| Kit type | Basic system with coil springs |
| Shocks | Performance shocks, included |
| Lift height range | 5 to 6.99 inches |
| Front springs | Straight design, lower spring rate |
| Rear springs | Dual stage |
| Tire and wheel guidance | 37×12.50/R17 on 17×9 wheels, 37×12.50/R18 on 18×9, 37×13.50/R20 on 20×9.5, 37×13.50/R22 on 22×9.5, each with 5 inch BS |
Vehicle fitment
It fits 2014–2018 Ram 2500 trucks. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The tire sizes below fit with minor trimming on 5 inch backspacing (BS) wheels. Check tire clearance at full lock after installation, and have the alignment and driveline angles checked once the lift is in. Trimming is part of the fit for these tire sizes, so plan for it when the lift goes in.
What’s included
Coil spring suspension system with straight front coil springs, angled lower mounts, dual stage rear coil springs and performance shocks.









