Overview
The Fabtech K3070 is a 5-inch radius arm lift for the 2013–2018 Ram 3500. It uses replacement tubular radius arms with Fabtech’s dimple die side plates, which Fabtech says give strength and a rugged appearance. The arms add caster for oversized tires and the higher ride height.
The stock front coil springs are mounted with angular steel spacers so the factory spring bow is kept. Flat spacers do not preserve that bow. A heavy duty 1/4-inch thick steel front track bar drop bracket centers the axle at the new height. Steel front bump extensions are fitted in place of long urethane bump stops, which can blow out. The rear uses a block and U-bolt system with bump stop extensions.
Key features
- 5-inch lift, range 5 to 6.99 inches
- Tubular radius arms with dimple die side plates
- Increased caster for oversized tires
- Angular steel spacers for the front coil springs
- 1/4-inch thick steel front track bar drop bracket
- Steel front bump extensions
Front end geometry after a lift
Lifting a truck with a radius arm system changes the front axle’s position and the angle of the steering linkage. A track bar drop bracket helps keep the axle centered side to side at the new height, which matters for steering stability and tire wear. Rear block and U-bolt systems work with the bump stop extensions to control how far the axle travels, so check that the rear springs seat correctly after installation.
Trucks that carry heavy loads put extra strain on the front joints, so periodic inspection of the track bar bushings and spring mounts is worthwhile. Look for play in the steering, uneven wear across the front tires or a wandering feel on the highway. A professional alignment after any change to the front end helps keep the wheels straight and the tires wearing evenly.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K3070 |
| UPC | 700007027891 |
| Lift height | 5 inches (range 5 to 6.99 inches) |
| Suspension type | Radius arm |
| Front spring spacers | Angular steel |
| Track bar drop bracket | 1/4-inch thick steel, front |
| Rear lift | Block and U-bolt system with bump stop extensions |
| Tire and wheel fit | 37×12.50R17 on 17×9, 37×12.50R18 on 18×9, 37×13.50R20 on 20×9.5; 5-inch backspacing |
| Shocks | Included |
Vehicle fitment
It fits the 2013–2018 Ram 3500 in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman models.
The list covers the Ram 3500 in 2013 through 2018 only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each tire and wheel combination needs minor trimming. The track bar drop bracket installs at the front, and the block and U-bolt system installs at the rear.
What’s included
Tubular radius arms with dimple die side plates, angular steel front spring spacers, the front track bar drop bracket, steel front bump extensions, the rear block and U-bolt system with bump stop extensions and shocks.









