Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Lift Kits
Showing 757–768 of 1736 resultsSorted by popularity
-
Lift Kits
Tuff Country 2.5 Inch Lift Kit – 22810K
- Tuff Country 22810K 2.5 inch front and 2 inch rear lift for 1981–1996 Ford Bronco and F-150
- Front coil springs and radius arm bracket
- Rear axle pivot bracket, rear blocks and 4 inch block
- U-bolts and hardware bag included
- Shocks not included; part number 22810K
SKU: T/C22810K -
Lift Kits
Tuff Country Lift Kit w/ Shock – 16993KN
- Tuff Country 16993KN lift kit with SX8000 shocks for 2001–2010 Silverado 2500 HD and Sierra 2500 HD
- 6 inch front lift and 4 inch rear lift
- X member, skid plate and compression arms
- Differential, carrier bearing and torsion bar relocation brackets
- Axle spacer, lift blocks and U-bolts included
SKU: T/C16993KN -
Lift Kits
Tuff Country Lift Kit w/ Shock – 16959KN
- Tuff Country 16959KN 6 inch lift kit with SX8000 shocks for 1999–2005 Chevrolet Silverado 1500 and GMC Sierra 1500
- Front crossmember, skid plate, compression arms and knuckles
- Lift blocks, U-bolts and add-a-leaf kit at the rear
- Differential relocation brackets and torsion bar crossmember bracket
- Axle spacers included; part number 16959KN
SKU: T/C16959KN -
Lift Kits
Tuff Country Lift Kit w/ Shock – 16721KN
- Tuff Country 16721KN 6 inch lift with SX8000 shocks for 1973–1986 Chevrolet K20 and GMC K2500 trucks
- SX8000 shocks and shock boots included
- EZ-Ride front springs and 52 inch rear springs
- Steering arm, U-bolts and transfer case drop kit
- Sway bar drop kit and brake line extension kit
SKU: T/C16721KN -
Lift Kits
Tuff Country 6 Inch Lift Kit – 16721K
- Tuff Country 16721K 6 inch lift for 1973–1986 Chevrolet K20 and 1979–1986 GMC K2500 trucks
- EZ-Ride front springs and 52 inch rear springs
- Steering arm and U-bolts
- Transfer case drop kit and sway bar drop kit
- Brake line extension kit; shocks not included
SKU: T/C16721K -
Lift Kits
Tuff Country 6 Inch Lift Kit – 16720K
- Tuff Country 16720K 6 inch lift for 1973–1986 Chevrolet K20 and 1975–1978 GMC K25 trucks
- EZ-Ride front springs and steering arm
- 4 inch block kit and 2 inch add-a-leaf at the rear
- Transfer case drop kit and sway bar drop kit
- Shocks not included; part number 16720K
SKU: T/C16720K -
Lift Kits
Tuff Country Lift Kit w/ Shock – 16711KN
- Tuff Country 16711KN 6 inch lift with SX8000 shocks for 1973–1987 Chevrolet and GMC K-series trucks
- EZ-Ride front springs and 52 inch rear springs
- Steering arm, rear blocks and U-bolts
- Transfer case drop kit and sway bar drop kit
- Brake line extension kit and shock boots included
SKU: T/C16711KN -
Lift Kits
Tuff Country Lift Kit w/ Shock – 14990KN
- Tuff Country 14990KN lift kit with SX8000 shocks for 2001–2007 Chevrolet Silverado 3500 and GMC Sierra 3500
- 4 inch front lift and 2 inch rear lift
- Diff relocation brackets, lower subframe and torsion bar crossmember brackets
- Rear lift blocks and CV axle spacers
- Shocks included
SKU: T/C14990KN -
-
Lift Kits
Tuff Country Lift Kit w/ Shock – 14613KN
- Tuff Country 14613KN lift kit with SX8000 shocks for 1969–1972 Chevrolet K10 and K20
- 4 inch front lift and 5 inch rear lift
- Heavy duty front springs with 52 inch rear springs
- Steering arm, U-bolts and brake line extension kit
- Shocks included
SKU: T/C14613KN -
Lift Kits
Tuff Country Lift Kit w/ Shock – 14612KN
- Tuff Country 14612KN lift kit with SX8000 shocks for 1969–1972 Chevrolet K10 and K20
- 4 inch front lift and 5 inch rear lift
- EZ-Ride front springs and 52 inch rear springs
- Steering arm, U-bolts and brake line extension kit
- Shocks included
SKU: T/C14612KN
What a lift kit includes
A lift kit is a bundle of parts that raises the body or frame relative to the axles. Listings in this category show how much the contents vary. Some kits are little more than spacers and bump stops, while others add replacement coil springs, extended sway bar links, track bar brackets, steering drop components and matched shocks.
Lift height is the headline number, but it is only part of the story. A kit sold as 3.5 inch, 4 inch or 6 inch describes nominal lift, and the actual change depends on the vehicle, tire size and how much it sags with weight.
Short arm, long arm and spacer designs
Design matters more than height. Common types you will see here:
- Spacer and strut kits raise the ride height cheaply and keep factory geometry, which suits moderate lifts.
- Short arm kits keep the factory control arm mounting points and replace springs, arms and shocks. They are simple to install and work well for daily drivers.
- Long arm and 4-link kits relocate the arm mounts with crossmembers, giving better articulation and a flatter arm angle at the cost of more complex installation.
- Radius arm and drop bracket kits are common on solid-axle trucks and corrected geometry varies by model.
Kits with a stage or number in the name usually add components step by step, so read the contents list rather than assuming two kits of the same height are equivalent.
Shocks and geometry correction
Raising a vehicle changes control arm angles, driveline angles and steering geometry. Good kits include correction parts such as caster-correcting bushings, cam bolts for pinion angle, drop brackets, a high steer or drag link, and extended brake lines. If a kit leaves these out, plan to buy them separately.
Shocks are either included or sold separately. Twin tube, monotube and reservoir shocks differ in heat handling and ride feel. Confirm the shock lengths suit the lift height, since a shock that is too short can limit travel and one that is too long can bottom the bump stops.
Installation and compatibility
Lift kits are vehicle specific. Confirm fitment for your exact year, make, model, cab or door configuration, drivetrain (2WD or 4WD) and engine, then compare against the manufacturer's specifications. Part numbers often change between model years.
Suspension, steering and brake line work is safety critical. Professional installation is a sound choice unless you have the tools and experience, and every fastener should be tightened to the specified torque with the vehicle at ride height. Plan on an alignment after the lift, plus a check of headlight aim, speedometer calibration if you change tire size, and driveshaft angles.
Lift height, bumper height and tire rules vary by state, so check local regulations.
Maintenance and common mistakes
A lifted suspension needs more attention than a stock one. Recheck every suspension bolt after the first 100 miles or so, because bushings settle and fasteners can lose torque. Grease any fittings on control arms and ball joints on the schedule the manufacturer gives, and inspect bump stops, shock mounts and brake lines at each oil change.
- Do not pick a lift height first and shop for parts second. Start with the tire size you want and the use you have in mind.
- Do not skip extended brake lines or a driveshaft check on taller lifts.
- Do not mix leftover parts from different kits, since spring rates and arm lengths are matched within a kit.
- Remember that a taller vehicle behaves differently in corners and in emergency maneuvers, so adjust your driving.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Lift Kits brands
- Pro Comp Suspension (613)
- Rubicon Express (338)
- Fabtech (162)
- Rough Country (98)
- Tuff Country (90)
- Skyjacker (80)
- TeraFlex (64)
- Daystar (62)
- ReadyLift (59)
- Trail Master (40)
- Genuine Packages (26)
- ARB 4x4 Accessories (24)
Lift Kits FAQ
How much lift do I need for 35 inch tires?
It depends on the vehicle, backspacing and trimming. Many solid-axle vehicles clear 35s with about 3.5 to 4 inches of lift plus some trimming, while independent front suspension trucks vary. Check the kit manufacturer's tire size guidance for your exact model.
Do I need an alignment after installing a lift kit?
Yes. Changing ride height alters caster, camber and toe, so an alignment is required after installation. Headlight aim and driveline angles should also be checked, and a high steer or geometry correction parts may be needed.
Is a long arm kit better than a short arm kit?
Long arm kits generally improve articulation and geometry at taller lifts but cost more and are harder to install. Short arm kits are simpler and fine for moderate lifts and mostly street use.
Will a lift kit affect my ride and fuel economy?
Usually yes. A taller, heavier setup raises the center of gravity and increases drag, and bigger tires add weight and rolling resistance. Quality shocks and correct alignment help the ride but cannot fully offset those changes.
















