Overview
The Tuff Country 14843 is a 4 inch lift kit for the 1995–1998 Chevrolet Tahoe and the 1995–1998 GMC Yukon. It is a crossmember style kit that uses relocation brackets for the control arms and differential, along with lifted blocks at the rear.
The kit includes a spindle and transfer case drop bracket, a rear sway bracket end link, bushings, a brake line extension bracket, a rear shock clevis mount and an axle component. Shocks are not included, so the existing shocks are used or replaced separately.
The lift height range is 3 to 4.99 inches, and the kit gives a 4 inch lift.
Key features
- 4 inch lift kit
- Control arm relocation bracket
- Differential relocation bracket
- Spindle and transfer case drop bracket
- Rear sway bracket end link
- Lifted blocks at the rear
- Brake line extension bracket and rear shock clevis mount
Driveline checks after lifting
A crossmember style lift moves the mounting points for the control arms and differential, so the driveline angles change. Steeper angles can cause vibration at speed, and a transfer case drop bracket also affects the front driveshaft. Measuring the angles and checking driveshaft length after installation helps catch problems early, especially on a truck used for highway towing.
Alignment should be checked once the kit is in place, since the relocation brackets change suspension geometry. Bushings in the control arms and differential are often replaced during a relocation install because they carry the new load angles. Inspect the rear sway bracket end link, lifted blocks and U-bolts after the first few drives, and keep an eye on the brake lines where the extension bracket is mounted.
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | 14843 |
| UPC | 698815148439 |
| Lift | 4 inch |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Crossmember |
| Rear lift method | Lift blocks and U-bolts |
| Shocks | Not included |
Vehicle fitment
It fits the 1995–1998 Chevrolet Tahoe (Base, LS and LT) and the 1995–1998 GMC Yukon (Base, SL, SLE and SLT).
Tahoe and Yukon model years outside 1995–1998 fall outside this fit. Match your truck’s year, model and trim before ordering.
Installation notes
The control arm and differential relocation brackets move the suspension mounting points, so the driveline angles and the alignment should be checked after the lift is installed. Because the kit includes a transfer case drop bracket, check the driveshaft length as well.
What’s included
The kit includes the control arm and differential relocation brackets, spindle and transfer case drop brackets, rear sway bracket end link, bushings, lifted blocks, brake line extension bracket and rear shock clevis mount.
Not included: Shocks.









