Lighting & Lighting Accessories
Showing 2353–2364 of 2467 resultsSorted by popularity
-
-
-
Light Mounting Brackets & Cradles
Rigid Industries Lower Bumper Light Bar Mount Kit (Black ) – 40156
Light Mounting Brackets & CradlesRigid Industries Lower Bumper Light Bar Mount Kit (Black ) – 40156
- Rigid Industries lower bumper light bar mount kit, part number 40156
- Stainless steel brackets with black powder coat for 30 in. SR-Series lights
- Includes the hardware needed for installation
- Toyota Tacoma fitment is described but not confirmed here
SKU: RIG40156 -
Offroad Racing Fog & Driving Lights
Rigid Industries Ignite LED Backup Light Kit – Surface Mount (Black) – 20541
Offroad Racing Fog & Driving LightsRigid Industries Ignite LED Backup Light Kit – Surface Mount (Black) – 20541
- Pair of Ignite backup lights with surface mount brackets
- 1000 raw lumens per light in a 1.4 x 1.4 x 2 inch housing
- Diffused beam, black finish, IP68 compliant
- Less than 1 amp per light, low minimum voltage of 6 VDC up to 28 VDC
- Wiring harness not included
SKU: RIG20541 -
Offroad Racing Fog & Driving Lights
50 Inch LED Light Bar with Brackets (Black) – LIGJK07161
- Bare steel bracket for a 50 inch LED light bar on a Jeep JK Wrangler windshield
- Mounts to the existing lower windshield bracket bolts with rubber liners to protect paint
- Shipped as bare steel, ready to paint or powder coat
- Built for a 50 inch E-Series or SR-Series light bar
- Light bar listed at 288W LED power and 25920 raw lumens
SKU: ADDLIGJK07161 -
Light Mounting Brackets & Cradles
Poison Spyder A-Pillar 50 Inch Light Bar Mount (Bare) – 45-28-R50
- Bare steel A-pillar light bar mount for a 50-inch Rigid Industries light bar on the Jeep JK Wrangler
- CNC laser cut from 3/16-inch plate, brake-formed and finish welded
- Attaches to the A-pillar; uses the existing lower windshield bracket bolts
- Rubber liners included; 2-door and 4-door models; UPC 614901728682
SKU: PSC45-28-R50 -
Offroad Racing Fog & Driving Lights
Rigid Industries Radiance Green Back-Light Pods (Black) – 20203
- Radiance pod with green back-lighting, sold as a pair
- 3 inch square housing with 900 raw lumens and 15 watts
- Back-lighting available in white, green, amber, blue and red
- Mounting brackets and wiring harness included
- IP68 compliant with a high impact polycarbonate lens
SKU: RIG20203 -
-
Fog/Driving Light Wiring Kit
Rigid Industries Truck-Lite LED Headlight PWM Anti Flicker Adaptor – H13 to H4 – 55006
Fog/Driving Light Wiring KitRigid Industries Truck-Lite LED Headlight PWM Anti Flicker Adaptor – H13 to H4 – 55006
- Rigid Industries Truck-Lite LED headlight PWM anti flicker adaptor, H13 to H4, model 55006
- Direct plug-in pigtails and 16 gauge wire
- Encapsulated circuitry
- Fitment not listed by year, make or model
SKU: RIG55006
What this category covers
Lighting for a 4x4 falls into two broad groups. The first is auxiliary lighting added to the vehicle: light bars, pod lights, fog and driving lamps, work lamps and rock lights. The second is replacement and repair lighting: headlights, tail and brake lights, side markers, bulbs, bezels and sockets that restore factory function. The subcategories here separate these so you can go straight to the type you need.
Choosing auxiliary lights
Start with what the light needs to do. Driving lights throw a longer, narrower beam for high-speed visibility on dirt roads. Fog lights spread low and wide to cut under dust and mist. Flood or work lamps light the area around the vehicle for camp and recovery tasks. Light bars combine these roles depending on optics, and many offer combination or hybrid beam patterns.
- Beam pattern: spot for distance, flood for width, combo for general use.
- Housing and sealing: look for an ingress protection rating suited to water crossings and pressure washing.
- Lens material: polycarbonate resists rock strikes better than glass but can scratch.
- Power draw: confirm the lamp's amperage against your wiring and alternator capacity.
Replacement lamps and bulbs
For factory-style repair, match the lamp to the exact year, make, model and side of the vehicle. Bulb type matters: halogen, HID and LED units are not always interchangeable in the same housing, and a poorly matched LED can scatter light and blind oncoming drivers. Check the bulb designation on the old unit or in the owner's manual before ordering.
Wiring and installation
Auxiliary lights should be wired through a relay with a correctly rated fuse, not straight from a switch. Use wire gauge appropriate for the current and length of run, seal connectors against moisture, and mount lights solidly so vibration does not loosen them. Accessory brackets and cradles are sold separately for many light bars, so confirm what is included in a given kit.
Legal and compatibility notes
Rules on auxiliary lighting vary by state. Many jurisdictions restrict forward-facing lights on public roads, require covers when not off-road, or limit color. Check your local regulations. Confirm fitment for your exact vehicle and review the manufacturer's specifications before installing.
A few habits make lighting upgrades last. Keep a short list of the bulb types and lamp part numbers on your vehicle, because side markers, headlights and tail lights often differ between model years and trims. When mounting auxiliary lights, aim them after installation on level ground at a wall or garage door, so the beam lands where you intend rather than into the eyes of other drivers. Inspect wiring for chafing after rough trips, and dab dielectric grease on connectors to resist corrosion. Replacement lenses and covers are sold for many popular lamps, so a cracked lens does not always mean a new light. Finally, think about total electrical load: several high-output lamps running at once can strain a stock alternator, particularly with a winch or fridge on the same system. Keep spare fuses and a small supply of weatherproof connectors in the vehicle, since a blown fuse is the most common reason a light stops working on the trail.
Popular Lighting & Lighting Accessories brands
- Rigid Industries (755)
- Hella (204)
- KC HiLites (189)
- Rugged Ridge (146)
- Spyder Auto Group (122)
- Oracle Lighting (108)
- Recon (101)
- Crown Automotive (100)
- Piaa Lighting (99)
- Omix-Ada (88)
- Baja Designs (83)
- JW Speaker (74)
Shop Lighting & Lighting Accessories by type
- Fog & Driving Lights (328)
- Offroad Racing (328)
- Offroad Racing Fog & Driving Lights (537)
- Lens Covers and Shields (251)
- Light Mounting Brackets & Cradles (290)
- Headlights Housings and Conversions (198)
- Replacement Headlights, Tail Lights & Bulbs (227)
- Replacement Bulbs (141)
- Tail & Brake Lights (129)
- Headlights (97)
- Side Marker Light Assembly (77)
- LED Replacement Bulbs (85)
- Light Bar Mounting Kit (64)
- Lighting Accessories (64)
- Headlight & Tail Light Bezel Sets (51)
- Fog/Driving Light Wiring Kit (35)
- Third Brake Lights (34)
- Auxiliary Lighting (32)
- Work Lamp (20)
- Roof Marker Light (20)
- Multi-Use Accent Lights (18)
- Headlight Switch (16)
- Work Lamps (11)
- License Plate Lighting (8)
- Side Marker Light Socket (8)
- Third Brake Light Bracket (8)
- Fog/Driving/Offroad Light Lens (7)
- Reverse / Backup Lights (5)
- LED Resistor (6)
- Off Road Light Bezel Sets (6)
Lighting & Lighting Accessories FAQ
What is the difference between driving lights and fog lights?
Driving lights produce a longer, tighter beam to extend your reach at speed. Fog lights produce a wide, flat beam mounted low to reduce glare off dust, rain or snow. They solve different problems, and many vehicles carry both.
Do I need a relay to install a light bar?
Yes, in most cases. A relay lets a small switch control a high-current circuit, and an inline fuse near the battery protects the wiring. Follow the lamp maker's wiring diagram and use wire sized for the current draw.
Can I replace halogen bulbs with LED bulbs?
Sometimes, but the housing was designed around a halogen filament. LED retrofit bulbs can produce poor beam patterns or glare in reflector housings. Check that the product is intended for your vehicle and review local lighting regulations.
Are off-road lights legal to use on the street?
Rules vary by state and usually restrict how auxiliary lights may be mounted, wired and used on public roads. Many require covers or separate switching. Check your local regulations before driving with them on.








