Overview
The Rigid Industries Radiance Green Back-Light Pod (part 20203, black, sold as a pair) is a 3 inch square driving pod with a separately controlled green back-light. Rigid rates each pod at 900 raw lumens and 15 watts, with 3 LEDs for the forward optic and a 1 amp draw. The pod is built with an alloy housing and heatsink and carries an IP68 rating.
The Radiance pod uses the same aluminum alloy housing as the D-Series, paired with a black exposed printed circuit board and a forward projecting optic. The design suits owners who want a distinctive lighting look with a durable housing.
Key features
- Independently controlled green back-lighting
- Forward projecting optics for focused output
- Alloy housing with an integrated heatsink
- Black exposed printed circuit board
- High impact polycarbonate lens
- IP68 compliant
Accent lighting and wiring
Accent lights are often used for appearance, not for seeing the road, so the choice of color and when the light runs matters. A back-light that can be switched separately lets the owner run the accent without the forward optic, which is useful at shows, in camp or while parked. Keep the accent light aimed so it does not shine into other drivers’ mirrors or eyes when it is run on the road.
Wiring is the other key step. Route the harness away from heat and moving parts, and fuse the feed so a fault does not reach other circuits. Because an exposed circuit board is a feature of this design, keep the housing sealed and check the gasket after each installation. Clean the lens periodically so the color stays even.
- Run accent light separately from forward optic
- Fuse the feed and keep harness clear of heat
- Check the housing seal after installation
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 20203 |
| UPC | 815711012965 |
| Light type | LED, square housing, surface mount |
| Size | 3×3 inch square housing |
| Output | 900 raw lumens |
| Power | 15 watts; 1 amp draw |
| LEDs | 3 LEDs |
| Voltage | 9-15 V DC |
| Back-light color | Green |
| Housing | Alloy with heatsink |
| Ratings | IP68 compliant |
| Sold as | Pair |
Vehicle fitment
This is a universal pod, not a model-specific part. Mounting brackets and a wiring harness are included, so the pods can go on most vehicles with room for a 3 inch housing. Check the mounting surface and the wire route before drilling.
Installation notes
The wiring harness is included. Wire the back-light and forward light through a switch and fuse, and check local rules for auxiliary and accent lighting on public roads.
What’s included
Two Radiance pods with mounting brackets and a wiring harness. The back-light is controlled separately from the forward light.












