Overview
The Rigid Industries D2-Series LED Light is a surface-mount pair of lights with a Hyperspot optic and four LEDs in each light. The kit includes a plug-and-play harness with a switch, a mounting bracket and the hardware needed to fit both lights.
The D2-Series is a cast aluminum design with a durable polycarbonate lens and integrated thermal management. It starts instantly, has voltage protection and includes a GORE pressure equalizing vent. It is engineered and assembled in the USA.
Key features
- Hyperspot optic
- Four LEDs per light
- Cast aluminum housing
- Durable polycarbonate lens
- Plug-and-play harness with switch
- GORE pressure equalizing vent
Mounting and aiming a pair
Two surface-mounted lights work best when they are matched in height and aim. Set both brackets on the same plane, then aim them so the Hyperspot beams overlap at the distance you travel most. Mark the bracket holes before drilling, and check that nothing hidden sits behind the mounting surface.
Fused wiring protects the harness and the switch if a fault occurs, so tie the circuit into a fuse close to the power source. Lights that run on the front of a vehicle take a lot of road spray and debris, so inspect the lens and bracket after rough trips. Tighten fasteners after the first few drives, since vibration can shift a bracket that was fitted well.
- Match the height of both lights
- Mark and check drill locations first
- Fuse the circuit at the power source
- Inspect the lens after muddy trips
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774027130 |
| Series | D2-Series |
| Light type | LED light, sold as a pair |
| LED count | 4 LEDs per light |
| Optic | Hyperspot |
| Housing | Cast aluminum |
| Lens | Durable polycarbonate |
| Mounting | Surface, bracket |
| Wiring | Plug-and-play harness with switch |
Vehicle fitment
It is a universal fit and is not built for one vehicle. The bracket and hardware are included, so you choose where the pair is mounted on each vehicle.
Installation notes
Use the included plug-and-play harness and switch, and fasten the bracket to a solid surface before connecting the lights. Keep the cable clear of moving parts, and check local rules on driving lights before using them on a road vehicle.
What’s included
The kit includes the pair of lights, a plug-and-play harness with switch, a mounting bracket and the hardware.









