Overview
The Rigid Industries SR-Series SR-MF Single Row 20 Deg. Flood Mini LED Light is a compact single-row light with a 20-degree flood beam for flush mounting. It uses three white LEDs and the Specter optic produces 1500 raw lumens.
The SR-MF is ultra low power and runs on a 7 to 36 VDC input. It has a 50,000-hour life, compared with about 1,000 hours for halogen and 5,000 hours for xenon. It has no hot spots and no bouncing beams, with an instant on and off. The kit includes a plug-and-play harness, switch and cast bracket, and the light is IP68 rated.
The housing is unbreakable polycarbonate with a durable polyester powder-coat finish, so the light is built to handle rough off-road use.
Key features
- 20-degree flood beam
- 1500 raw lumens with the Specter optic
- Three white LEDs
- Flush mount
- Plug-and-play harness, switch and cast bracket
- IP68 rating
Flood light aim and panel fit
A flood pattern spreads light wide and short, which suits the area directly beside and in front of the vehicle, such as a campsite, a hitch or a rocky step. Aim it low so the beam covers the work area without shining into the eyes of other drivers. Small adjustments matter more with a close-range pattern than with a long-reach spot.
Flush mounting leaves less room for error than a bracket. Check the panel behind the cut for wiring and fuel lines, and seal the gap around the housing to keep dust and water out. Keep the harness neatly routed with loom and a fuse close to the power source, and recheck the light’s aim after the first rough drive.
- Aim the flood beam low for close work
- Check the panel behind the cut
- Seal the gap around the housing
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774027819 |
| Series | SR-MF Single Row |
| Light type | LED light, sold as a single light |
| Light shape | Square |
| Mounting | Flush |
| Beam pattern | Flood, 20-degree |
| Optic | Specter |
| Raw lumens | 1500 |
| LED count | 3 white LEDs |
| Input voltage | 7 to 36 VDC |
| Ingress rating | IP68 |
Vehicle fitment
This light is not made for one vehicle, and the owner checks the panel before cutting. Because it mounts flush, the panel opening must match the mini housing.
Installation notes
Cut a clean flush opening and wire the light through the included harness and switch. Keep the cable clear of moving parts and heat, and check local rules on driving lights before using the light on a road vehicle.
What’s included
The kit includes the mini flood light, the plug-and-play harness and switch, and the cast bracket.









