Overview
The Rigid Industries Ignite LED Backup Light Kit (part 20541, surface mount, black) is a pair of small reverse lights that add backup illumination to a vehicle. Most vehicles have weak factory reverse lighting, and Rigid makes the Ignite backup kit to add compact, powerful light behind the vehicle. Each Ignite light gives 1000 raw lumens in a housing that measures 1.4 x 1.4 x 2 inches.
The kit is built from Ignite Series accessory lights and comes with mounting brackets and hardware. The beam is diffused. Each light draws less than one amp, so the lights can often run from the existing backup light circuit. A flush mount version of the same kit is also available.
Key features
- Pair of Ignite lights with a surface mount bracket
- 1000 raw lumens per light
- Diffused light beam pattern
- Low minimum voltage of 6 VDC, operating up to 28 VDC
- IP68 compliant
- Smaller than Rigid’s flush mount Ignite options
Before you mount backup lights
Backup lights are mostly used at low speed, close to people and obstacles, so the beam pattern and mounting height matter more than brightness alone. A diffused beam spreads light over the area behind the vehicle, which helps the driver and anyone standing nearby see the ground. Surface mounted lights stand off the body, so check that the bracket does not catch on a tailgate, trailer hitch or cargo that sits close to the rear.
Wiring is the other check. Tap into the backup circuit only after confirming the existing fuse and wire gauge can handle the added load, even though each light draws under one amp. Use an inline fuse close to the tap, and seal any splice against moisture. Test both lights in reverse before the vehicle is driven on a road, and look at the lens after rough trips to catch cracks or loose brackets.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 20541 |
| UPC | 849774015007 |
| Mount | Surface mount, with brackets and hardware |
| Beam pattern | Diffused |
| Output | 1000 raw lumens per light |
| Size | 1.4 x 1.4 x 2 inches per light |
| Voltage | 6-28 VDC |
| Current | Less than 1 amp per light |
| Color | Black |
| Ratings | IP68 compliant |
| Sold as | Pair |
Vehicle fitment
This kit is not tied to a specific year, make or model. Confirm fit for your vehicle’s year, model and trim before ordering, and make sure the bracket position clears the rear body before drilling.
Installation notes
A wiring harness is not included. Because each light draws less than one amp, the lights can often be tapped into the vehicle’s existing backup lighting circuit. Use a fuse and check local rules for auxiliary lights before mounting.
What’s included
A pair of Ignite surface mount lights, mounting brackets and related hardware.
Not included: a wiring harness.






















