Lighting & Lighting Accessories
Showing 2065–2076 of 2467 resultsSorted by popularity
-
Offroad Racing
Square LED Flood Lights with Brackets (Black) – LIGJK07163
- Genuine Packages LIGJK07163 square LED flood light kit with brackets
- 20 Watts, flood beam pattern, clear lens, black finish
- Housing rated IP 67, listed life span of 50,000+ hours
- Includes wiring harness, switch, relay and two sets of mounting brackets
- Check fit for your year, make and model before ordering.
SKU: ADDLIGJK07163 -
Offroad Racing
LED Light Bundle (Black) – LIGJK0708
- Genuine Packages LED light bundle LIGJK0708, manufacturer list covers 2007–2008 Jeep Wrangler (JK) Unlimited Rubicon, Sahara and X
- Six Bosch style plug-in relays and six ATO fuses (three 15 amp, three 30 amp)
- Six diodes to protect sensitive accessories
- Bare steel A-pillar brackets
- Listed light bar power 288W, raw lumen 25920lm
SKU: ADDLIGJK0708 -
Light Mounting Brackets & Cradles
Artec Industries A-Pillar Dual LED Cube Light Mount – JL5603
- A-pillar mount for two cube or D-series LED lights
- Fits the 2018 Jeep Wrangler JL, 2 and 4 door
- Rigid 1/8 inch steel, fully welded and powder coated
- Designed for Rigid Industries D Series dually lights and pod lights with metal brackets
- Made in the USA from USA materials
SKU: A/IJL5603 -
Offroad Racing Fog & Driving Lights
Rigid Industries Ignite LED Spot Light – Surface Mount (Black) – 20511
Offroad Racing Fog & Driving LightsRigid Industries Ignite LED Spot Light – Surface Mount (Black) – 20511
- Ignite spot light with a 1000 raw lumen output
- Surface mount with a GoPro style bracket for many mounting options
- Low minimum voltage of 6 VDC, up to 28 VDC
- IP68 compliant, under 1 amp draw
- One light, mounting brackets and hardware included
SKU: RIG20511 -
-
Offroad Racing Fog & Driving Lights
KC HiLites 6-Piece LED Rock Light Kit in Clear – 91025
- Written for the Jeep Wrangler JK, 2 and 4-door models
- Six clear Cyclone LED rock lights, 5 W per light
- No drilling required, mounts to factory locations
- IP68 rated, 6 to 16 volt input
- Complete wiring harness included
SKU: K/C91025 -
-
Light Mounting Brackets & Cradles
Rigid Industries A-Pillar Light Mount D-Series – Set of Two (Black ) – 40139
Light Mounting Brackets & CradlesRigid Industries A-Pillar Light Mount D-Series – Set of Two (Black ) – 40139
- Set of two A-pillar mounts for D-Series (Dually, D2) LED lights
- For the Jeep Wrangler JK; uses existing mounting bolts, no drilling
- 3/16″ stainless steel, black powder coat
- Lights not included
SKU: RIG40139 -
-
Light Mounting Brackets & Cradles
Rigid Industries Raptor A-Pillar Brackets – 41626
- Mounts two Rigid D-Series LED lights (not included) at the base of the A-pillars
- Built for the 17-Current Ford F-150 SVT Raptor
- Direct fit A-Pillar mounting type, black finish
- Includes everything needed to install two D-Series lights
SKU: RIG41626 -
Headlights Housings and Conversions
Rigid Industries Truck-Lite 7 Inch Round LED Headlights w/ H13 to H4 Adaptors (Chrome) – 55001
Headlights Housings and ConversionsRigid Industries Truck-Lite 7 Inch Round LED Headlights w/ H13 to H4 Adaptors (Chrome) – 55001
- Universal fit: Rigid Industries lists no specific vehicle for these 7 inch round LED headlights
- Chrome finish, e-coat aluminum housing and hard-coated polycarbonate lens
- H13 to H4 adaptors included; sold as a pair
- DOT compliant, with 2 LED arrays per unit
- 3 year limited lifetime warranty.
SKU: RIG55001 -
Headlights Housings and Conversions
Rigid Industries Truck-Lite 7 Inch Round Heated LED Headlights (Black) – 55005
Headlights Housings and ConversionsRigid Industries Truck-Lite 7 Inch Round Heated LED Headlights (Black) – 55005
- Rigid Industries 55005, 7 inch round heated LED headlight, black, sold as a pair
- Universal fit, not vehicle-specific: confirm your headlight opening is 7 inches round
- Heated lens active only when temperatures drop under 50 F, melting snow and ice
- Two LED arrays in a bulb-free design, DOT compliant
- Includes H13 to H4 adaptors
SKU: RIG55005
What this category covers
Lighting for a 4x4 falls into two broad groups. The first is auxiliary lighting added to the vehicle: light bars, pod lights, fog and driving lamps, work lamps and rock lights. The second is replacement and repair lighting: headlights, tail and brake lights, side markers, bulbs, bezels and sockets that restore factory function. The subcategories here separate these so you can go straight to the type you need.
Choosing auxiliary lights
Start with what the light needs to do. Driving lights throw a longer, narrower beam for high-speed visibility on dirt roads. Fog lights spread low and wide to cut under dust and mist. Flood or work lamps light the area around the vehicle for camp and recovery tasks. Light bars combine these roles depending on optics, and many offer combination or hybrid beam patterns.
- Beam pattern: spot for distance, flood for width, combo for general use.
- Housing and sealing: look for an ingress protection rating suited to water crossings and pressure washing.
- Lens material: polycarbonate resists rock strikes better than glass but can scratch.
- Power draw: confirm the lamp's amperage against your wiring and alternator capacity.
Replacement lamps and bulbs
For factory-style repair, match the lamp to the exact year, make, model and side of the vehicle. Bulb type matters: halogen, HID and LED units are not always interchangeable in the same housing, and a poorly matched LED can scatter light and blind oncoming drivers. Check the bulb designation on the old unit or in the owner's manual before ordering.
Wiring and installation
Auxiliary lights should be wired through a relay with a correctly rated fuse, not straight from a switch. Use wire gauge appropriate for the current and length of run, seal connectors against moisture, and mount lights solidly so vibration does not loosen them. Accessory brackets and cradles are sold separately for many light bars, so confirm what is included in a given kit.
Legal and compatibility notes
Rules on auxiliary lighting vary by state. Many jurisdictions restrict forward-facing lights on public roads, require covers when not off-road, or limit color. Check your local regulations. Confirm fitment for your exact vehicle and review the manufacturer's specifications before installing.
A few habits make lighting upgrades last. Keep a short list of the bulb types and lamp part numbers on your vehicle, because side markers, headlights and tail lights often differ between model years and trims. When mounting auxiliary lights, aim them after installation on level ground at a wall or garage door, so the beam lands where you intend rather than into the eyes of other drivers. Inspect wiring for chafing after rough trips, and dab dielectric grease on connectors to resist corrosion. Replacement lenses and covers are sold for many popular lamps, so a cracked lens does not always mean a new light. Finally, think about total electrical load: several high-output lamps running at once can strain a stock alternator, particularly with a winch or fridge on the same system. Keep spare fuses and a small supply of weatherproof connectors in the vehicle, since a blown fuse is the most common reason a light stops working on the trail.
Popular Lighting & Lighting Accessories brands
- Rigid Industries (755)
- Hella (204)
- KC HiLites (189)
- Rugged Ridge (146)
- Spyder Auto Group (122)
- Oracle Lighting (108)
- Recon (101)
- Crown Automotive (100)
- Piaa Lighting (99)
- Omix-Ada (88)
- Baja Designs (83)
- JW Speaker (74)
Shop Lighting & Lighting Accessories by type
- Fog & Driving Lights (328)
- Offroad Racing (328)
- Offroad Racing Fog & Driving Lights (537)
- Lens Covers and Shields (251)
- Light Mounting Brackets & Cradles (290)
- Headlights Housings and Conversions (198)
- Replacement Headlights, Tail Lights & Bulbs (227)
- Replacement Bulbs (141)
- Tail & Brake Lights (129)
- Headlights (97)
- Side Marker Light Assembly (77)
- LED Replacement Bulbs (85)
- Light Bar Mounting Kit (64)
- Lighting Accessories (64)
- Headlight & Tail Light Bezel Sets (51)
- Fog/Driving Light Wiring Kit (35)
- Third Brake Lights (34)
- Auxiliary Lighting (32)
- Work Lamp (20)
- Roof Marker Light (20)
- Multi-Use Accent Lights (18)
- Headlight Switch (16)
- Work Lamps (11)
- License Plate Lighting (8)
- Side Marker Light Socket (8)
- Third Brake Light Bracket (8)
- Fog/Driving/Offroad Light Lens (7)
- Reverse / Backup Lights (5)
- LED Resistor (6)
- Off Road Light Bezel Sets (6)
Lighting & Lighting Accessories FAQ
What is the difference between driving lights and fog lights?
Driving lights produce a longer, tighter beam to extend your reach at speed. Fog lights produce a wide, flat beam mounted low to reduce glare off dust, rain or snow. They solve different problems, and many vehicles carry both.
Do I need a relay to install a light bar?
Yes, in most cases. A relay lets a small switch control a high-current circuit, and an inline fuse near the battery protects the wiring. Follow the lamp maker's wiring diagram and use wire sized for the current draw.
Can I replace halogen bulbs with LED bulbs?
Sometimes, but the housing was designed around a halogen filament. LED retrofit bulbs can produce poor beam patterns or glare in reflector housings. Check that the product is intended for your vehicle and review local lighting regulations.
Are off-road lights legal to use on the street?
Rules vary by state and usually restrict how auxiliary lights may be mounted, wired and used on public roads. Many require covers or separate switching. Check your local regulations before driving with them on.







