Overview
The Rigid Industries 1.75 Inch Tube Mount System (black, model 47520) is a universal tube mount for Rigid E-Series lights. Its 3-piece adjustable clamps fit 1.75″ tubing, so it attaches a light to a tube of that diameter rather than to a specific vehicle.
The mount is offered as an option for Jeeps, side by sides, motorcycles and ATVs. Cradle mounts are an alternative, and the Clamp System covers tubing from 1.25 inch to 2.25 inch. This model is sized for 1.75 inch tubing.
Key features
- 3-piece adjustable clamps
- Mounts to 1.75″ tubing
- Fits Rigid E-Series lights
- Universal fit tube mount
- Black finish
Tube size and clamp range
The clamp range on this family of mounts spans several tube diameters, but each model is sized for one. Before you fit the light, measure the tube at the mounting point with a caliper and compare the reading to the 1.75 inch size. A tube that is even slightly off will not seat the clamps evenly, and the light can rotate or sag when the trail gets rough.
Choose the light before the clamp. Confirm the light’s housing size and bracket footprint so the fixture sits centered on the tube. Route the power cable with a fused relay in the circuit, and keep the cable clear of hinges, steering parts and sharp tube edges.
- Measure the tube with a caliper before ordering
- Confirm the light footprint against the clamp
- Keep cable clear of sharp tube edges
- Tighten clamps evenly to avoid rotation
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 47520 |
| UPC | 815711015126 |
| Color | Black |
| Clamp type | 3-piece adjustable clamps |
| Tubing diameter | 1.75″ |
| Compatible lights | Rigid E-Series |
| Mounting type | Tube Mount |
| Fitment type | Universal Fit |
Vehicle fitment
This is a universal fit tube mount, so no vehicle is named for it. Fit depends on tubing diameter, and this model is sized for 1.75″ tubing.
Rigid’s wider clamp range (1.25″ to 2.25″) is not what this model covers, so measure your tube first. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The clamps are sized for 1.75″ tubing only. A tube of a different diameter needs a different clamp size, so check the tube before fitting the light.
What’s included
The 3-piece adjustable clamp set for 1.75″ tubing.
Not included: Rigid E-Series lights.
