Overview
The Rigid Industries A-Pillar Light Mount D-Series, part number 40139, is a set of two black brackets for adding Dually or D2 LED lights to the lower portion of the A-pillars on a Jeep Wrangler JK (2007-2018).
The brackets mount to the A-pillars using the existing mounting bolts, so no drilling or cutting is required, and they let you adjust the placement of the beam horizontally and vertically. They are made from 3/16″ stainless steel and powder-coated black to match the trim and the Rigid Industries lights.
The brackets carry a limited lifetime warranty. The lights are sold separately and are not part of this set.
Key features
- LED light mounts for D-Series lights (Dually and D2)
- Set of two brackets
- Uses existing A-pillar mounting bolts: no drilling or cutting required
- Beam placement adjustable horizontally and vertically
- 3/16″ stainless steel construction
- Black powder coat to match the trim and Rigid Industries lights
- Limited lifetime warranty stated by the manufacturer
Wiring and beam aim
Auxiliary lights on a Wrangler draw a good deal of current, so the wiring needs a fused feed and a relay rather than a direct tap to the battery. Route the harness away from moving suspension parts and the windshield hinge area, and secure it with clips so it does not rattle. A switch placed where the driver can reach it makes the lights easy to use on the trail.
Aim the lights after the mounts are set, and check the beam pattern on level ground at night. Adjustment is possible horizontally and vertically, so small changes can reduce glare for other drivers while keeping the road lit. Recheck the aim after rough trail days, since vibration can move the brackets slightly.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 40139 |
| UPC | 815711011968 |
| Product type | A-pillar LED light mount |
| Designed for | D-Series lights (Dually, D2) |
| Quantity | Set of two |
| Color | Black |
| Material | 3/16″ stainless steel |
| Finish | Powder coat, black |
| Mounting type | Windshield hinge |
| Warranty | Limited lifetime |
Vehicle fitment
The mounts are for the Jeep Wrangler JK (2007-2018), the model whose A-pillars they clamp to.
The mounts are designed for the JK generation. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
These mounts clamp to existing A-pillar bolts, so a fused, relayed feed for the lights and a disconnected battery come first.
- Aim the beams so oncoming drivers are not dazzled, then tighten the hardware to the correct torque for the mounting bolts.
- Look the brackets over again once you have a few drives on them.
- Auxiliary lights on public roads are regulated differently from place to place, so read your local rules.
What’s included
- Two black A-pillar light mounts
Not included: the Dually or D2 LED lights.
