Overview
The KC HiLites 6-Piece LED Rock Light Kit in Clear, model 91025, is a set of six Cyclone LED rock lights with mounts and a wiring harness, designed for the Jeep Wrangler JK in 2 and 4-door models. The kit is universal fit, and the lights mount to factory locations without drilling. Each light is IP68 rated and runs on 6 to 16 volts.
Key features
- Clear lens, six lights in the kit
- Flush output of 5 W per light
- Samsung 5630 LED source
- Draws 0.42 A and runs on 6 to 16 volts
- IP68 rating
- No drilling required, with mounts to factory locations
Rock light placement and wiring
Rock lights work best when they are placed to show the footing under the rocker and the tire path, since that is where a driver most needs light on technical trails. Factory mount locations keep the lights out of the way of the body, but they still need a check for clearance around suspension arms, steps and skid plates before the first trail run.
The harness should be routed along the frame or body channels away from heat and moving parts, then fused and switched. Clean the lenses after mud runs, and inspect the seals on each light for cracks or moisture, because a clear lens that fogs inside usually means a seal has let water in.
- Check clearance around suspension arms and skid plates
- Route the harness away from heat and moving parts
- Fuse and switch the harness before use
- Inspect the seals after deep water or mud runs
Specifications
| Brand | KC HiLites |
|---|---|
| UPC | 84709910259 |
| Kit | 6-piece LED rock light kit |
| Lens color | Clear |
| Output | 5 W per light, flush |
| LED source | Samsung 5630 |
| Amp draw | 0.42 A |
| Voltage | 6 to 16 V |
| IP rating | IP68 |
| Dimensions | 0.53″ deep x 2.20 inch wide per light |
| Installation | Plug-and-play, no drilling |
Vehicle fitment
The kit is designed for the Jeep Wrangler JK in 2 and 4-door models and mounts to factory locations. It is also universal fit, so confirm your Wrangler is a JK before ordering and check the mount points on your body.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is plug-and-play with no drilling, and the wiring harness connects the lights. Connect the harness to a switched power source with a fuse, within its 6 to 16 volt range, and check local rules on rock and auxiliary lights before using them on public roads.
What’s included
Six Cyclone LED rock lights with mounts, and the complete wiring harness.












