Overview
The Rigid Industries 55005 is a 7 inch round heated LED headlight in black, sold as a pair and identified by UPC 849774001772. Rigid Industries describes these Truck-Lite headlight kits for light, medium and heavy-duty trucks, off-road vehicles, classic cars and motorcycles, and the 7 inch round size is the measurement to check against your existing headlight opening.
The headlights use two LED arrays in a bulb-free, solid state design with encapsulated circuitry, which Rigid Industries says resists damage from shock and vibration. The lens is heated and runs only when temperatures drop under 50 F, melting snow and ice across the lens surface. Metalized reflectors are meant to spread a smooth, clean light across the driving surface, and the LEDs produce a whiter light closer to daylight color temperature than traditional bulbs.
Key features
- Heated lens, active only when temperatures drop under 50 F, to melt snow and ice
- Two LED arrays for brighter, whiter light output closer to daylight color temperature
- Metalized reflector optics for a smooth, clean light across the driving surface
- Bulb-free, solid state design that Rigid Industries says resists shock and vibration
- Hard-coated polycarbonate lens over an e-coat aluminum housing
- Encapsulated circuitry and 16 gauge wire
- DOT compliant
- Includes H13 to H4 adaptors
Before you buy
Conversion headlights like these replace the complete sealed unit, so the mounting bracket, plug and aim matter as much as light output. Measure the opening and check the depth behind the housing, since a deep unit can press against the hood or radiator support. Confirm the wiring plug suits your harness, or plan a splice rather than cutting the stock connector.
A heated lens draws power while it runs, so a fused circuit and relay help keep that load off the factory switch. Aim the beams on level ground after the first drive, because small changes in mounting angle shift the cutoff. Check local rules for headlight color and beam pattern before driving on public roads.
- Measure opening depth and clearance before ordering
- Use a fused relay for the heated lens circuit
- Re-aim after the first few drives
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 55005 |
| UPC | 849774001772 |
| Size | 7 inch round |
| Finish | Black (per product title) |
| Lens | Hard-coated polycarbonate, heated |
| Housing | E-coat aluminum |
| Reflectors | Metalized |
| LED arrays | 2 |
| Wire gauge | 16 gauge |
| Circuitry | Encapsulated |
| Heated lens activation | Temperatures under 50 F |
| Sold as | Pair |
| Compliance | DOT compliant |
| Warranty | 3 year limited lifetime warranty |
Vehicle fitment
This is a universal-fit headlight and is not built for one make, model or year. Before installing, check that your existing headlight opening is 7 inches round and that the mounting suits your vehicle.
No specific vehicles are named. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The headlights are wired with 16 gauge wire. Because they are sold as a pair, check that both openings match before mounting. Wire the headlights through a fused circuit and follow local rules for headlight use on public roads.
What’s included
A pair of 7 inch round heated LED headlights with H13 to H4 adaptors.
