Overview
The Genuine Packages Square LED Flood Lights with Brackets (Black), part number LIGJK07163, is a square LED flood light kit with brackets and a clear lens for adding extra forward light. It carries a flood beam pattern and a 20 Watt rating.
The square LED flood lights belong to the Explorer Series line and are rated for a life span of 50,000+ hours. The housing is rated IP 67 and the case has a shockproof polyester powder coat, with ultra-high lumens per watt efficiency.
Key features
- Square LED flood light with a flood beam pattern
- Clear lens and black finish
- Rated 20 Watts
- Listed life span of 50,000+ hours
- IP 67 housing
- Shockproof polyester powder coat case
- Kit includes wiring harness, switch, relay, and two sets of mounting brackets with hardware
Choosing a flood light position
Flood lights spread wide, short-range light, which suits close work on trails and campsites more than long highway reach. Mounting above the bumper or on a bracket above the windshield places the beam above most road debris, while a lower placement lights the ground in front of the front tires.
A switch and relay make it possible to run the lights only when needed. Keep the switch within easy reach of the driver and label it so passengers know what it controls. Route wires along existing harnesses where possible and clip them away from heat sources and moving parts.
Sealed housings resist water and dust, but the lens and seals still need attention. Wash the lens with clean water, look for cracked seals after hard trail use, and tighten any loose bracket hardware before the next trip.
- Aim the beam for the ground in front of the vehicle
- Use the switch to limit runtime with the engine off
- Clip wiring clear of heat and moving parts
- Check seals and brackets after rough trails
Specifications
| Brand | Genuine Packages |
|---|---|
| Part number | LIGJK07163 |
| UPC | 700007631391 |
| Light shape | Square |
| Lens color | Clear |
| Bulb type | LED |
| Beam pattern | Flood |
| Power | 20 Watts |
| Size | 2 inch x 2 inch (the attribute list gives 3 inch) |
| Color | Black |
| Life span | 50,000+ hours |
| Housing rating | IP 67 |
| Mounting type | Bracket |
| Format | Kit |
Vehicle fitment
The kit suits 2-door and 4-door vehicles. Choose mounting positions that match your bumper, roof or windshield, and confirm fit for your vehicle’s year, model and trim before ordering.
Compare the bracket mounting with your bumper, roof or windshield before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes a wiring harness, switch and relay, so the lights are meant to be wired through that switch and relay. Wire the lights through a fused circuit and check local road-use rules for auxiliary lights before using them on public roads.
What’s included
Square LED flood lights with brackets, wiring harness, switch, relay, two sets of mounting brackets and mounting hardware.
















