Overview
The Genuine Packages LIGJK0708 is a black LED light bundle, a wiring and mounting package for a windshield-area light bar on the Jeep Wrangler JK. The bundle pairs six plug-in relays and six fuses with bare steel A-pillar brackets. The manufacturer fitment list covers the 2007–2008 Jeep Wrangler (JK) Unlimited Rubicon, Unlimited Sahara and Unlimited X.
The bundle is built around the wiring and mounting parts for a windshield-area light bar, and the contents below cover what is included. It includes two flood beam fog lamps with clear lenses rated 20 watts, a 288W light bar power rating and 25920 raw lumens. It fits 2-door and 4-door models.
Key features
- Six Bosch style cube plug-in relays
- Six ATO style fuses: three 15 amp and three 30 amp
- Six diodes to protect sensitive accessories such as LED lights from field collapse
- Bare steel brackets that attach to the A-pillar
- Fits 2-door and 4-door models
- Two flood beam pattern fog lamps with clear lens, 20 watts
- Light bar power listed at 288W, raw lumen 25920lm
Mounting and wiring tips
A light bar bracket carries real weight at the windshield, so the A-pillar mount should be bolted firmly and checked after rough trail sessions. Fasteners can back off on washboard roads, and a torque check at the start of each season keeps the assembly tight.
Relays and fuses are easiest to plan before the harness is cut. Mount the relay block where it is dry and reachable, and keep each light on its own fused circuit. Use a switch that cuts power at the relay, not only at the lamp, to limit voltage loss through long runs.
Bare steel brackets rust quickly in wet or salty conditions. Prep the surface, prime, and finish with paint or powder coat before fitting, and touch up any scratches that happen during installation.
- Dry, reachable spot for the relay block
- Separate fused circuit for each light
- Prime and finish bare steel before mounting
- Recheck bracket bolts after the first trail runs
Specifications
| Brand | Genuine Packages |
|---|---|
| Part number | LIGJK0708 |
| UPC | 700007631401 |
| Bulb type | LED |
| Lens color | Clear |
| Mounting type | Bracket |
| Size | 50 inch |
| Light bar power | 288W |
| Raw lumen | 25920lm |
| Fog lamp rating | 20 Watts, 2 inch x 2 inch |
| Fuses | Three 15 amp, three 30 amp (ATO style) |
| Relays | Six Bosch style cube plug-in |
Vehicle fitment
The manufacturer fitment list names the 2007–2008 Jeep Wrangler (JK) Unlimited Rubicon, Unlimited Sahara and Unlimited X. Other model years and trims are not in that list, and the Wrangler TJ and JL generations are different vehicles that are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bare steel brackets arrive unfinished, so paint or powder coat them before mounting. Route each light through its own fused circuit, and disconnect the battery before wiring the relays.
What’s included
Six relays, six fuses (three 15 amp and three 30 amp), six diodes and bare steel brackets.
Not included: Check whether a light bar is needed separately before starting the installation.
































