Overview
The Baja Designs LP6 Pro Driving Combo LED Light (part 270013, amber) is a 6 inch driving light with 10,300 total lumens. It delivers 8,600 forward projecting lumens and 1,700 lumens of peripheral light, giving a 200 degree spread of usable light. The light is rated 90 watts with a 6.5 amp draw.
The LP6 uses Baja’s patented Integrated Peripheral Technology, which Baja says gives dedicated side lighting. Direct Ducted Cooling carries air through the front of the housing and over the rear heat sinks, which Baja describes as improving cooling capacity. The light carries built-in overvoltage protection and an amber daytime running light, so it can run as a day running light and switch to high power driving. Baja Designs rates the lens as hard coated polycarbonate and the bezel as billet machined aluminum. The amber daytime running light and the low and high power modes give the light a lot of flexibility.
Key features
- Driving combo pattern with 42 degree wide driving optics and 6 degree spot optics
- Integrated Peripheral Technology for 1,700 lumens of peripheral light
- Direct Ducted Cooling for better heat management
- Amber daytime running light
- Low and high power modes
- Hard coated polycarbonate front lens
- Built-in overvoltage protection
- IP69K waterproof, submersible to 9ft
Amber light and daytime use
An amber light is often chosen for daytime running and for conditions where a warm color helps reduce glare in dust, fog or snow. It can run as a daytime light and switch to high power when the driving conditions call for more output. Low and high modes give a way to manage the power draw when running on a single vehicle circuit.
The housing is built for weather and impact, but mounting and wiring still need attention. Use a fuse for the power feed, route the wiring away from heat and moving parts, and keep the connections sealed. Check the bezel and lens after rough trips and clean them with water, since mud and grit can reduce the light output over time.
Specifications
| Brand | Baja Designs |
|---|---|
| Part number | 270013 |
| Series | LP6 Pro |
| Light color | Amber |
| Beam pattern | Driving combo (42 degree wide driving and 6 degree spot) |
| Output | 10,300 total lumens; 8,600 forward; 1,700 peripheral |
| Power | 90 watts; 6.5 amp draw |
| LED life | 49,930 hours |
| Size | 6 inch |
| Mounting | Surface |
| Bezel | Billet machined aluminum |
| Housing color | Black |
| Ratings | IP69K; IK10 compliant; exceeds MIL-STD810G |
| Sold as | Single |
Vehicle fitment
This driving light is universal and is not built for one vehicle. It can be mounted on trucks, Jeeps and other vehicles. Confirm the surface mount and wiring route before drilling.
Installation notes
The light uses a surface mount and a 6.5 amp draw. Fuse the power feed and check local rules before using driving lights on public roads.
What’s included
One LP6 Pro driving combo light in amber, with its billet machined aluminum bezel.













