Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 493–504 of 902 resultsSorted by popularity
-
Multi Shock Bracket
Icon Vehicle Dynamics 2nd Gen Toyota Tundra Secondary Suspenison Shock Mounting Kit – 56109
Multi Shock BracketIcon Vehicle Dynamics 2nd Gen Toyota Tundra Secondary Suspenison Shock Mounting Kit – 56109
- Front secondary shock mounting kit for the 2nd generation Toyota Tundra, fitting 2007 to 2021 models
- ICON Vehicle Dynamics part number ICO56109
- Sold without shock absorbers, so the shocks are a separate purchase
- Direct fit, with location and position both front
SKU: ICO56109 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics 2nd Gen Toyota Tundra S2 2.5 VS PiggyBack Shock Absorber Set – 57722P
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics 2nd Gen Toyota Tundra S2 2.5 VS PiggyBack Shock Absorber Set – 57722P
- Front 2.5 piggyback reservoir shock set for 2007–2021 Toyota Tundra, second-generation trucks
- Eyelet top and bottom mounts on a 2.5 inch body
- Hydraulic damping with gas charge
- Lift range and damping adjustment should be confirmed before ordering
- Part number ICO57722P
SKU: ICO57722P -
Shock Absorbers & Shock Accessories
ICON Vehicle Dynamics 2.5 VS Remote Reservoir Shock Set with CDEV Adjusters – 57810EP
Shock Absorbers & Shock AccessoriesICON Vehicle Dynamics 2.5 VS Remote Reservoir Shock Set with CDEV Adjusters – 57810EP
- Rear 2.5 Aluminum Series remote reservoir shock with CDEV electronic valve for 2010–2024 Toyota 4Runner
- Bump zone adds about 20% extra damping force
- CDEV valve controlled through ICON’s mobile app
- Recommended ICON Alloys wheels up to 20×9
- Part number ICO57810EP
SKU: ICO57810EP -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics 2.5 VS Remote Reservoir Front Coilover Kit for 6″ ProComp Lift with CDCV Adjuster – 58711C-CB
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics 2.5 VS Remote Reservoir Front Coilover Kit for 6″ ProComp Lift with CDCV Adjuster – 58711C-CB
- Front 2.5 Series remote reservoir coilover for a 6 inch ProComp lift on Toyota Tacoma
- CDCV adjuster with 10 settings
- Upgraded coil springs for added front-end weight
- Fits 1995–2004 Toyota Tacoma
- Part number ICO58711C-CB
SKU: ICO58711C-CB -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics 2.5 VS Remote Reservoir Extended Travel Coilover Kit – 58745-700
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics 2.5 VS Remote Reservoir Extended Travel Coilover Kit – 58745-700
- Front 2.5 Series extended travel remote reservoir coilover kit for 2003–2009 Toyota 4Runner, Lexus GX470 and 2007–2009 FJ Cruiser
- Lift range of 0 to 3.5 inches
- Increased wheel travel in the extended length versions
- Needs aftermarket upper control arms with the extended length coilovers
- Part number ICO58745-700
SKU: ICO58745-700 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics 2.5 VS Remote Reservoir Coilover Kit with CDCV Adjuster – 61700C
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics 2.5 VS Remote Reservoir Coilover Kit with CDCV Adjuster – 61700C
- Front 2.5 Series remote reservoir coilover with CDCV for 2008–2016 Ford F-250 and F-350 Super Duty
- Bump zone adds about 20% extra damping force
- External CDC valve with 10 compression levels
- Eyelet mounts at both ends, 2.5 inch body
- Part number ICO61700C
SKU: ICO61700C -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics 2.5 VS Remote Reservoir Coilover Kit with CDCV Adjuster – 58746C
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics 2.5 VS Remote Reservoir Coilover Kit with CDCV Adjuster – 58746C
- Front 2.5 Series remote reservoir coilover with CDCV for 0 to 3.5 inch lift
- Fits 2010–2023 Toyota 4Runner and Lexus GX460, and 2010–2014 FJ Cruiser
- External CDC valve with 10 settings from soft to hard
- Upgraded coil springs for front bumpers and winches
- Part number ICO58746C
SKU: ICO58746C -
Shock Absorbers & Shock Accessories
ICON Vehicle Dynamics 2.5 VS Extended Travel Remote Reservoir Coilover Shock Set with CDEV Adjusters – 58747E
Shock Absorbers & Shock AccessoriesICON Vehicle Dynamics 2.5 VS Extended Travel Remote Reservoir Coilover Shock Set with CDEV Adjusters – 58747E
- Front 2.5 Series extended travel remote reservoir coilover set with CDEV electronic adjusters
- Lift adjustable from 0 to 3.5 inches
- Fits 2010–2024 Toyota 4Runner
- CDEV valve reacts in under 40 milliseconds, controlled through an ICON app
- Part number ICO58747E
SKU: ICO58747E -
Shock Absorber Boot
Icon Vehicle Dynamics 2.5 Coil Wrap (Pair) – 191009
- Neoprene coil-over shock covers supplied as a pair
- Black, with Velcro closure and elastic banded ends
- Keeps dirt, mud, salt and rocks off the shock shaft and seals
- Sized at 2.5 for coil-over shock bodies
- Part number ICO191009
SKU: ICO191009 -
-
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics 2.0 Aluminum Series Rear Shock for 2.5″ Lift – 26527
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics 2.0 Aluminum Series Rear Shock for 2.5″ Lift – 26527
- Rear 2.0 Aluminum Series shock for a 2.5 inch lift, for 2020–2026 Jeep Gladiator
- Nitrogen charged monotube with OEM top and bottom mounts
- One-piece linear and digressive piston with vehicle-specific valving
- Needs a sway bar relocation or link kit with JT coil parts
- Part number ICO26527
SKU: ICO26527
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.

