Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 529–540 of 902 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.0 Series Remote Reservoir Front Shock – 26519R
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.0 Series Remote Reservoir Front Shock – 26519R
- Front 2.0 Series remote reservoir shock for 2007–2018 Jeep Wrangler JK
- Aluminum body with gas charged hydraulic damping
- Rebuildable and revalveable
- Front position, part number ICO26519R
- Covers two-door and four-door JK versions
SKU: ICO26519R -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.0 Series Remote Reservoir Coilover Shock Absorber Kit – 28009
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.0 Series Remote Reservoir Coilover Shock Absorber Kit – 28009
- 2.0 Series remote reservoir coilover kit for 2018 Jeep Wrangler JK
- Dual-rate coil springs cold-wound and shot-peened
- FK rod end bearings to reduce suspension deflection
- Remote reservoir for steady damping under prolonged use
- Part number ICO28009
SKU: ICO28009 -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.0 Aluminum Series Shock Absorber – 56510
- Rear 2.0 Aluminum Series shock for 0 to 3 inch lift on 1991–2007 Toyota Land Cruiser and 1998–2007 Lexus LX470 Base
- Premium 5WT shock oil and one-piece linear and digressive piston
- Nitrogen charged monotube with internal reservoir
- 6063 anodized aluminum body and reservoir tubing
- Part number ICO56510
SKU: ICO56510 -
Shock Absorbers & Shock Accessories
Icon Suspension V.S. 2.0 Aluminum Series Remote Reservoir Shock Absorber – 56505R
Shock Absorbers & Shock AccessoriesIcon Suspension V.S. 2.0 Aluminum Series Remote Reservoir Shock Absorber – 56505R
- Rear 2.0 Aluminum Series remote reservoir shock for Lexus GX and Toyota 4Runner, FJ Cruiser
- Vehicle-specific valving and rebuildable design
- Aluminum body for heat dissipation
- Part number ICO56505R
- Direct-fit rear position
SKU: ICO56505R -
Shock Absorbers & Shock Accessories
Icon Suspension Front Remote Reservoir Coilover Kit with CDCV Adjust – 58750C
Shock Absorbers & Shock AccessoriesIcon Suspension Front Remote Reservoir Coilover Kit with CDCV Adjust – 58750C
- Front 2.5 remote reservoir coilover with CDCV for 2007–2021 Toyota Tundra
- Lift adjustable from 0 to 3.5 inches
- CDCV valve with 10 settings from soft to hard
- Vehicle-specific valving and a 2.5 inch shock body
- Part number ICO58750C
SKU: ICO58750C -
Shock Absorbers & Shock Accessories
Icon Suspension Front 3.0 Series Remote Reservoir CDCV Coilover Kit – 58765
Shock Absorbers & Shock AccessoriesIcon Suspension Front 3.0 Series Remote Reservoir CDCV Coilover Kit – 58765
- Front 3.0 Series remote reservoir CDCV coilover for 2007–2021 Toyota Land Cruiser
- Piston area 50% larger in the ride zone and 100% larger in the bump zone than 2.5 coilovers
- Built-in ride height adjustment for 2.25 to 3.5 inches of front lift
- Eibach coil springs and FK rod end bearings
- Part number ICO58765
SKU: ICO58765 -
Shock Absorbers & Shock Accessories
Icon Suspension Ford Raptor Attitude Adjustment Collar – 0.5 – 2.25 Inch Lift – IVD6130B
Shock Absorbers & Shock AccessoriesIcon Suspension Ford Raptor Attitude Adjustment Collar – 0.5 – 2.25 Inch Lift – IVD6130B
- Front attitude adjustment collar for 0.5 to 2.25 inches of lift over stock
- Multi-height coil spring collar with a five-way top load shim
- CNC machined 6061 billet aluminum, black anodized
- Keeps the OE shock in the ride zone, with no shock disassembly
- Part number ICOIVD6130B
SKU: ICOIVD6130B -
-
Shock Absorbers & Shock Accessories
Icon Suspension 4.5 Lift Front Shock 2.0 Aluminum Series – 216523R
Shock Absorbers & Shock AccessoriesIcon Suspension 4.5 Lift Front Shock 2.0 Aluminum Series – 216523R
- Front shock for a 4.5 inch lift, 2.0 Aluminum Series
- Fits 2003–2013 Dodge and Ram 2500 and 3500 trucks
- Part number ICO216523R
- Front position, direct-fit listing
- Supplied as a single front shock
SKU: ICO216523R -
Shock Absorbers & Shock Accessories
Icon Suspension 3.0 Series Remote Reservoir Coilover Shock Kit with CDCV – 58755
Shock Absorbers & Shock AccessoriesIcon Suspension 3.0 Series Remote Reservoir Coilover Shock Kit with CDCV – 58755
- Front 3.0 Series remote reservoir coilover with CDCV, fits 2007–2021 Toyota Tundra
- Piston area 50% larger in the ride zone and 100% larger in the bump zone than 2.5 inch coilovers
- Multi-stage hydraulic bump zone in the last 40% of travel
- Built-in ride height adjustability for 1.63 to 3.5 inches of front lift
- Part number ICO58755
SKU: ICO58755 -
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.

