Select your vehicle

Icon Vehicle Dynamics 2.5 VS Remote Reservoir Front Coilover Kit for 6″ ProComp Lift with CDCV Adjuster – 58711C-CB

ICON Vehicle Dynamics

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front 2.5 Series remote reservoir coilover for a 6 inch ProComp lift on Toyota Tacoma
  • CDCV adjuster with 10 settings
  • Upgraded coil springs for added front-end weight
  • Fits 1995–2004 Toyota Tacoma
  • Part number ICO58711C-CB

Description

Overview

The ICON 2.5 VS Remote Reservoir Front Coilover Kit for 6 Inch ProComp Lift with CDCV Adjuster, part number ICO58711C-CB, is a front coilover kit for 1995–2004 Toyota Tacoma trucks in the Base, DLX, Limited, Pre Runner, S-Runner and SR5 versions. It is built for a 6 inch ProComp lift.

ICON’s Vehicle Specific 2.5 Series coilovers are configured for each application in both length and damping tune. They can be rebuilt and revalved, and ICON says they are designed to deliver strong off-road performance along with a smooth street ride. The body diameter is 2.5 inches, with a hydraulic, gas charged design.

The CDC valve is externally adjustable and offers 10 settings. Upgraded coil springs are included to support the added weight of accessories such as front bumpers and winches.

Key features

  • Configured for the Tacoma and the 6 inch ProComp lift.
  • CDCV valve with 10 settings.
  • Upgraded coil springs for added front weight.
  • Rebuildable and revalveable.
  • 2.5 inch body with eyelet bottom mount.

Matching a lift and load

A front lift changes the angles of the steering and suspension components, so the coilover, the lift and the wheel package should be matched before installation. Heavier front accessories put extra load on the springs, and the upgraded coil springs in this kit are meant for that added weight. Look at the steering linkage, ball joints and brake hoses after install, since a lift can change how they sit and move.

Older Tacomas often show wear in bushings, bump stops and the front axle mounts, so inspect those parts when the coilovers go in. A worn bump stop can let the suspension compress too far, while a tired spring can sag under a winch. Keep the adjuster set to a level that suits the way the truck is driven, and recheck torque on the mounts after the first few drives.

Specifications

Brand ICON Vehicle Dynamics
Part number ICO58711C-CB
Shock series 2.5 Coilover
Position Front
Top mount OEM
Bottom mount Eyelet
Body diameter 2.5 in
Valve CDC, 10 settings
Damping Hydraulic
Charge Gas charged

Vehicle fitment

It fits the 1995–2004 Toyota Tacoma in its Base, DLX, Limited, Pre Runner, S-Runner and SR5 versions. The 2005 and later Tacoma does not fit this kit.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One front coilover kit with upgraded coil springs and the CDC valve.

Fitment

VehicleYearsTrims
Toyota Tacoma1995–2004Base, DLX, Limited, Pre Runner, S-Runner, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does ICO58711C-CB fit a 2005 Tacoma?

No. The fitment listed runs through 2004 for the Tacoma, so 2005 and later trucks are not included. Confirm your year and trim before ordering this front coilover kit.

Is the coil spring included?

Yes. Upgraded coil springs are included to support added front weight from bumpers and winches. Check the package contents against your installation before starting, since the springs carry that load.

Is this kit made for a 6 inch lift?

The title ties the kit to a 6 inch ProComp lift. Confirm that your lift matches before ordering, since a coilover sized for one lift is not the right part for a different height.

How many settings does the CDCV adjuster have?

The adjuster is external and has 10 settings from soft to hard. It lets the ride be changed without taking the shock apart.

What should I inspect on the front end after a lift?

Check the ball joints, tie rod ends, brake hoses and bump stops for wear or clearance problems. Look at the tire contact and the steering feel on a test drive, and recheck all mounting bolts after the first few drives.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon