Overview
The ICON 2.5 VS Remote Reservoir Coilover Kit with CDCV Adjuster, part number ICO58746C, is a front coilover kit for the 2010–2023 Toyota 4Runner, the 2010–2023 Lexus GX460 and the 2010–2014 Toyota FJ Cruiser. It is a 2.5 inch remote reservoir coilover with a lift range of 0 to 3.5 inches.
The vehicle-specific valving gives a sport-tuned feel on and off the road. The 2.5 inch body and larger piston area compared with stock parts improve damping and ride across different terrain. The remote reservoir keeps damping consistent for longer and runs the shocks cooler during heavy use.
The CDC valve is an external adjuster with 10 settings from soft to hard. The kit includes upgraded coil springs, which ICON says support the added weight of accessories such as front bumpers and winches. ICON recommends pairing the front coilovers with its 2.0 Aluminum Series or 2.5 Series rear shocks so that front and rear control is balanced.
The upgraded coil springs support the extra weight of accessories such as front bumpers and winches. On a 4Runner or GX460 that carries a winch or heavy bumper, they address a load the stock springs may not be matched to.
The CDC valve gives 10 settings from soft to hard. ICON recommends pairing this front coilover with its rear 2.0 Aluminum Series or 2.5 Series shocks so that front and rear control stays balanced.
Key features
- External CDC valve with 10 settings from soft to hard.
- Upgraded coil springs for added front-end weight.
- Remote reservoir for consistent damping and cooler operation.
- Lift range of 0 to 3.5 inches.
- OEM top mount and eyelet bottom mount on a 2.5 inch body.
Before you buy
Front coilovers change how the whole front end works, so consider what the truck carries. A heavier bumper or winch puts more load on the springs, and the kit’s upgraded springs are built with that in mind. Think about how often the vehicle will carry gear, and whether the front and rear ends are being upgraded together, since mismatched damping can make the truck feel unsettled on rough ground.
Remote reservoir shocks are easier to service over time because the reservoir sits apart from the shock body, which keeps the oil separate from the heat of the main body. Before installation, check the mounts, bushings and brake lines near the front axle, since these are often replaced alongside coilovers. Re-check torque on the mounting hardware after the first few drives, and inspect the shock bodies and reservoir hoses periodically for seepage.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO58746C |
| Shock series | 3.0 Coilover Reservoir |
| Position | Front |
| Top mount | OEM |
| Bottom mount | Eyelet |
| Body diameter | 2.5 in |
| Lift range | 0 to 3.5 in |
| Valve | CDC, 10 settings |
| Damping | Hydraulic |
| Charge | Gas charged |
Vehicle fitment
It fits the 2010–2023 Lexus GX460 Base, Luxury and Premium versions, the 2010–2023 Toyota 4Runner across its trim range, and the 2010–2014 Toyota FJ Cruiser Base. Land Cruiser, Tacoma and Tundra models do not fit this kit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front coilover kit with upgraded coil springs and the CDC valve.
