Overview
The ICON 2.5 VS Remote Reservoir Shock Set with CDEV Adjusters, part number ICO57810EP, is a rear shock set for the 2010–2024 Toyota 4Runner. It is built from the 2.5 Aluminum Series with an electronic CDEV valve and is configured for each application in length and damping tune.
For piggyback and remote reservoir applications, a 6061 billet aluminum manifold sits a few inches below the top cap and forms an internal bump zone. That zone adds about 20% more damping force and helps prevent harsh bottom-outs when the suspension compresses quickly. The shock can be rebuilt and revalved.
The CDEV valve, or Compression Damping Electronic Valve, meters oil flow to set compression damping force. It is infinitely variable, reacts in under 40 milliseconds and uses hydraulic circuits tailored to each vehicle. Settings are controlled through ICON Intelligent Control and a mobile app, which draws on an onboard G-force sensor and gyroscope to adjust the shock for the terrain.
Recommended wheels are 17×8.5, 18×9 and 20×9 from the ICON Alloys line, each with a 0mm offset and backspacing of 4.75 to 5 inches. The recommended tire is 33 by 11.50 inches, and larger tires may need fender trimming.
Key features
- CDEV electronic valve that is infinitely variable.
- Valve reacts in under 40 milliseconds.
- Bump zone with about 20% additional damping force.
- Mobile app and onboard sensors adjust settings for the terrain.
- Rebuildable and revalveable.
Rear suspension considerations
Rear shocks carry the load of the cargo bed or rear seats and control how the back of the truck rebounds after a bump. An electronic valve can change the damping as conditions change, but it still depends on sound mounts, clean hydraulic lines and a healthy reservoir. Look for oil seepage at the shock body and reservoir, and check the bushings for cracking when the rear suspension is serviced.
Electronic valves rely on wiring and connectors, so keep the harness secured away from heat and moving parts. Water intrusion at a connector can cause intermittent behavior, so inspect the seals during routine maintenance. When wheels or tires change, check fender clearance at full compression. Replacing the rear shocks in pairs keeps the damping balanced from side to side.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO57810EP |
| Shock series | 2.5 Aluminum Series |
| Position | Rear |
| Valve | CDEV electronic |
| Valve response | Under 40 ms |
| Bump zone damping increase | About 20% |
| Recommended wheel | ICON Alloys 17×8.5, 18×9 or 20×9 |
| Recommended tire | 33 x 11.50 in |
Vehicle fitment
It fits the 2010–2024 Toyota 4Runner across its trim range, including Limited, Nightshade, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail and Venture. Other models do not fit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear shock set with the CDEV valve. Check the mounting hardware against the shocks being replaced before installation.
