Overview
The ICON 2.0 Aluminum Series Rear Shock for 2.5 Inch Lift, part number ICO26527, is a rear monotube shock for 2020–2026 Jeep Gladiator. It is sized for a 2.5 inch lift and uses OEM mounts at both the top and bottom, on a 2.0 in body.
ICON says its 2.0 Aluminum Series shocks are tailored to each application and suit everyday street driving and weekend off-road use. The shock is nitrogen charged with an internal reservoir, and it can be rebuilt and revalved. For harder off-road use, ICON points to the 2.5 Series, which it says is built to handle more abuse.
This rear shock is listed with notes for the rest of the setup. It needs a sway bar relocation kit (part 22062) or a sway bar link kit (part 22070), used together with the JT coil spacer (part 22065) or the JT coil spring (part 22066).
The shock uses OEM top and bottom mounts on a 2.0 in body, which is useful to check against the truck during fitting. The rear shock is used with a sway bar relocation kit or a sway bar link kit, along with the JT coil spacer or JT coil spring.
Key features
- Premium grade 5WT shock oil for consistent damping.
- One-piece linear and digressive piston with vehicle-specific valving.
- Nitrogen charged monotube with an internal reservoir.
- 5/8 inch chrome plated hardened steel shaft.
- 6063 anodized aluminum body for heat dissipation and corrosion resistance.
Matching lift and sway bar
Lift height changes the geometry of the rear suspension, so the shock length and mounting angle need to suit the rest of the setup. A shock built for a 2.5 inch lift will not match a different lift height, and mixing parts from separate kits can leave the suspension working against itself. Check the spring and spacer heights together before assembling the rear.
Sway bar relocation and link parts control how the rear axle moves relative to the body, and they are often replaced at the same time as the shock. Look at the bushings and end links during installation, and recheck fasteners after the first few drives. Keep spare hardware on hand for the parts you change.
- Confirm spacer or spring height first
- Inspect sway bar bushings during install
- Recheck fasteners after the first drives
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO26527 |
| Shock series | 2.0 Aluminum Series |
| Position | Rear |
| Lift rating | 2.5 in |
| Top mount | OEM |
| Bottom mount | OEM |
| Body diameter | 2.0 in |
| Shock type | Monotube |
| Damping | Hydraulic |
| Charge | Gas charged |
Vehicle fitment
It fits 2020–2026 Jeep Gladiator models across the trim range, including Altitude, High Altitude, Mojave, Overland, Rubicon, Sport S and Willys. Wrangler models do not fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear shocks on this setup need the sway bar relocation kit (part 22062) or the sway bar link kit (part 22070), along with the JT coil spacer (part 22065) or JT coil spring (part 22066). Confirm those parts are in place before the truck is driven.
What’s included
One rear shock. The sway bar kit and coil parts are supplied separately.

