Overview
The ICON 2.5 Coil Wrap, part number ICO191009, is a pair of black neoprene coil-over shock protection covers. They are made to keep dirt, mud, grime, snow, road salt, spray and rocks away from the shock shaft and seals, which ICON says is useful for vehicles that see extreme weather or heavy mud running.
Shaft pitting and cut seals are common reasons a shock is rebuilt early, and the covers help guard against both. The covers fasten with Velcro and have elastic banded ends that hold a close form fit around the shock body.
Key features
- Neoprene construction that adds a layer of resistance against dirt and grime.
- Covers the shock shaft and seals against mud, snow, road salt and rocks.
- Velcro closure that goes on in seconds.
- Elastic banded ends for a close form fit.
- Supplied as a pair in black.
Care for coil-over shafts
The exposed shaft is the part of a coil-over shock most likely to collect grit and moisture. Each time the suspension compresses, the shaft slides through the seal, so debris on it works into the seal lip and scratches the surface. Wiping the shaft clean after muddy or salty trips helps keep the seal working properly for longer.
Covers work best when they are checked regularly. Inspect the Velcro and elastic ends for wear, and make sure the cover sits flat against the body rather than riding up during travel. A torn or stretched cover should be replaced, since a loose cover can rub the shaft instead of protecting it. Look at the shaft for pitting or seepage during routine service.
- Wipe the shaft after muddy trips
- Check Velcro and elastic ends for wear
- Replace torn covers promptly
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO191009 |
| Product | Coil-over shock cover |
| Size | 2.5 in coil wrap |
| Color | Black |
| Material | Neoprene |
| Supplied as | Pair |
Vehicle fitment
These covers are not made for a specific vehicle. Check that the 2.5 size matches the body diameter of your coil-over shock before choosing.
Confirm the size against your shock before ordering.
Installation notes
Fit each cover over the coil-over shock body, then secure the Velcro. Check that the elastic ends sit snugly so the cover does not rub against the shaft during travel.
What’s included
One pair of black neoprene coil-over covers. Each cover uses Velcro and elastic banded ends.








