Overview
The ICON 2.5 VS Remote Reservoir Coilover Kit with CDCV Adjuster, part number ICO61700C, is a front coilover for 2008–2016 Ford F-250 Super Duty and F-350 Super Duty trucks. It has eyelet mounts at both ends, a 2.5 inch body and a hydraulic, gas charged design.
The 2.5 Series shocks are configured for each application in length and damping tune, and they can be rebuilt and revalved. For piggyback and remote reservoir layouts, a 6061 billet aluminum manifold sits a few inches below the top cap and forms a bump zone that adds about 20% more damping force. This helps prevent harsh bottom-outs and controls the suspension when it compresses quickly.
The CDC valve is externally adjustable and restricts oil flow into the reservoir, which creates 10 levels of compression damping force. For a more user-defined tune, ICON points to its Omega Series bypass shocks.
The bump zone is formed by a 6061 billet aluminum manifold and adds about 20% more damping force. The CDC valve is externally adjustable and creates 10 levels of compression damping force by restricting oil flow into the reservoir.
The coilover is configured for each application in length and damping tune and can be rebuilt and revalved. Its eyelet mounts at both ends should be compared with the existing front shocks before installation.
The fitment covers the 2008 to 2016 F-250 and F-350 Super Duty across their trim levels, so the model year on the truck is the first detail to check.
Key features
- External CDC valve with 10 compression damping levels.
- Bump zone with about 20% additional damping force.
- 6061 billet aluminum manifold forms the bump zone.
- Eyelet top and bottom mounts on a 2.5 inch body.
- Configured for each application in length and damping tune.
Towing and load considerations
A Super Duty that tows or carries heavy gear puts more load through the front suspension, so the coilovers and their mounts take more stress over time. Check the front end after loaded trips for worn bushings, bent brackets and loose hardware. A bump zone helps the shock resist sudden compression, but it cannot make up for worn mounts or a tired spring, so keep those parts in good condition.
Before choosing a setup, think about how the truck is used. Daily driving, job-site hauling and off-road trails all put different demands on the damping. Because the valve can be adjusted from outside the shock, the ride can be adjusted when the load changes. Inspect the reservoir hose and the manifold area for oil seepage each time the front end is serviced, and keep the dust boots clean so the shaft is not scored.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO61700C |
| Shock series | 2.5 Coilover Reservoir |
| Position | Front |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Body diameter | 2.5 in |
| Valve | CDC, 10 compression levels |
| Bump zone damping increase | About 20% |
| Damping | Hydraulic |
| Charge | Gas charged |
Vehicle fitment
It fits the 2008–2016 Ford F-250 Super Duty and 2008–2016 Ford F-350 Super Duty across their trim levels. The F-150 and later Super Duty model years do not fit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front coilover with the CDC valve. Check the mounting hardware against your existing front shock setup before starting the installation.
