Overview
The ICON 2.5 VS Extended Travel Remote Reservoir Coilover Shock Set with CDEV Adjusters, part number ICO58747E, is a front coilover set for 2010–2024 Toyota 4Runner. It uses a 2.5 inch remote reservoir body with a lift adjustment range of 0 to 3.5 inches.
The vehicle-specific valving gives a sport-tuned feel on and off the road. The larger shock body and increased piston area compared with stock parts improve damping and ride over varied terrain. The remote reservoir keeps damping consistent for longer and runs the shocks cooler during heavy use.
The CDEV valve is electronically controlled and meters oil flow to set damping force during compression. It is infinitely variable, reacts in under 40 milliseconds and makes fine adjustments for different terrain. Each hydraulic circuit is tailored to the application. The system works with ICON Intelligent Control, a companion mobile app, and onboard G-force and gyroscope sensor readings to predict terrain and adjust the settings.
ICON lists recommended wheels of 17×8.5, 18×9 and 20×9 ICON Alloys, with backspacing of 4.75 to 5 inches and 0mm offset, and tires up to 33 by 11.50 inches. Larger tires may fit, but fender trimming and modifications are noted as required.
Key features
- Electronic CDEV valve with infinitely variable damping control.
- Valve response time under 40 milliseconds.
- Lift range of 0 to 3.5 inches.
- Larger 2.5 inch body with increased piston area.
- Extended travel design that increases wheel travel.
Electronic damping considerations
Electronic damping systems change the valve setting as conditions change, which can help on mixed roads where a fixed tune would be too firm or too soft. The benefit depends on the system working reliably, so keep the controller, wiring and app connection in good order. A failure can leave the shocks at a default setting, so check the system before a trip.
Wheel and tire changes affect the shock more than most owners expect. A larger tire adds rotating mass and can change the suspension’s travel, and a wheel offset change can alter the shock’s loading angle. Check clearance through full suspension travel, including on the steering stops, before running a different size.
Extended travel coilovers also work hardest at full extension, so inspect the upper mounts and the body-side hardware after the first few trips.
- Check the app connection before each trip
- Confirm clearance at full travel
- Inspect mounts after the first few drives
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO58747E |
| Position | Front |
| Shock type | Remote reservoir coilover |
| Body diameter | 2.5 in |
| Lift range | 0 to 3.5 in |
| Valve | CDEV electronic |
| Valve response | Under 40 ms |
| Recommended wheel | ICON Alloys 17×8.5, 18×9 or 20×9 |
| Recommended tire | 33 x 11.50 in |
Vehicle fitment
It fits 2010–2024 Toyota 4Runner models across the trim range, including Limited, Nightshade, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail and Venture. Other Toyota and Lexus models do not fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Larger tires may need fender trimming and modifications. Check clearance at the wheel and tire size you plan to run before the kit is installed.
What’s included
One extended travel coilover set with the CDEV valve. Match the hardware to your mounts before fitting.


