Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 481–492 of 902 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
ICON Vehicle Dynamics IIC Install Kit for CDEV Shocks – 53504
- Intelligent Control (IIC) install kit for CDEV shocks on the 2010 to 2024 Toyota 4Runner
- G-force and gyroscope inputs, with CDEV valve control in under 40 milliseconds
- Bluetooth app with Normal, Desert and Haul drive modes and custom presets
- Part number ICO53504, with trip data recording
SKU: ICO53504 -
Shock Absorbers & Shock Accessories
ICON Vehicle Dynamics Icon Intellegent Control (IIC) Install Kit – 43501
Shock Absorbers & Shock AccessoriesICON Vehicle Dynamics Icon Intellegent Control (IIC) Install Kit – 43501
- Intelligent Control (IIC) install kit for CDEV front and rear coilovers on the 2021 to 2026 Ford Bronco
- Monitors G-force and gyroscope data over 1000 times per second
- Bluetooth app with Normal, Desert and Haul drive modes and custom presets
- Part number ICO43501, not compatible with Bronco Raptor
SKU: ICO43501 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics Front EXP Coilover Shock Absorber for HOSS 2.0 Suspension – 48602
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics Front EXP Coilover Shock Absorber for HOSS 2.0 Suspension – 48602
- Front EXP coilover shock for the 2021 to 2026 Ford Bronco with HOSS 2.0 suspension
- Lift of 0 to 3 inches over stock, reusing the factory coil spring
- 2.5-inch aluminum body with bar pin bottom mount and OEM top mount
- Part number ICO48602, sold individually with a quantity of 2 per vehicle
SKU: ICO48602 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics Front EXP Coilover Shock Absorber for HOSS 1.0 Suspension – 48601
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics Front EXP Coilover Shock Absorber for HOSS 1.0 Suspension – 48601
- Front EXP coilover shock for the 2021 to 2026 Ford Bronco with HOSS 1.0 suspension
- Lift of 1.5 to 3 inches over stock, reusing the factory coil spring
- 2.5-inch aluminum body with bar pin bottom mount and OEM top mount
- Part number ICO48601, sold individually with a quantity of 2 per vehicle
SKU: ICO48601 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics Front EXP Coilover Shock Absorber – 58671
- Front EXP coilover shock absorber for the 2022 Toyota Tundra
- Reuses the factory coil spring, with 0 to 3 inches of lift adjustment over stock
- 2.5-inch aluminum body, rebuildable and revalveable
- Part number ICO58671, sold individually with a quantity of 2 per vehicle
SKU: ICO58671 -
Shock Absorbers & Shock Accessories
ICON Vehicle Dynamics Front 2.5 VS RR CDCV Coilover Kit – 48700C
Shock Absorbers & Shock AccessoriesICON Vehicle Dynamics Front 2.5 VS RR CDCV Coilover Kit – 48700C
- Front 2.5 VS RR CDCV coilover kit for the 2021 to 2026 Ford Bronco, with remote reservoirs
- Compression Damping Control Valves are included for adjusting compression
- Lift adjustable 3 to 4 inches without Sasquatch, or 2 to 3 inches over Sasquatch
- Part number ICO48700C, not compatible with Bronco Raptor
SKU: ICO48700C -
Shock Absorbers & Shock Accessories
ICON Vehicle Dynamics Front 2.5 VS IR Coilover Kit – 48600
- Front 2.5 VS IR coilover kit for the 2021 to 2026 Ford Bronco
- Adjustable 3 to 4 inches of lift without Sasquatch, or 2 to 3 inches over a Sasquatch Bronco
- Requires upper control arms with Delta Joint Pro for lift above 2.5 inches
- Part number ICO48600, not compatible with Bronco Raptor
SKU: ICO48600 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics Ford F-150 4WD 0-2.75″ 2.5 VS Remote Reservoir Coilover Kit – 91823
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics Ford F-150 4WD 0-2.75″ 2.5 VS Remote Reservoir Coilover Kit – 91823
- Front 2.5 VS remote reservoir coilover kit for the 2021 to 2026 Ford F-150 4WD
- Remote reservoirs for steady damping and cooler shocks during heavy use
- 0 to 2.75 inches of lift height adjustability over stock
- Part number ICO91823
SKU: ICO91823 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics Ford F-150 4WD 0-2.75″ 2.5 VS IR Coilover Kit – 91722
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics Ford F-150 4WD 0-2.75″ 2.5 VS IR Coilover Kit – 91722
- Front 2.5 VS IR coilover kit for the 2021 to 2026 Ford F-150 4WD
- 0 to 2.75 inches of lift height adjustability over stock
- 2.5-inch shock body with eyelet bottom mount and OEM top mount
- Part number ICO91722, not compatible with continuous control damping trucks
SKU: ICO91722 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics Ford F-150 2WD 0-3″ 2.5 VS IR Coilover Kit – 91717
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics Ford F-150 2WD 0-3″ 2.5 VS IR Coilover Kit – 91717
- Front 2.5 V.S. IR coilover kit for the 2021 to 2026 Ford F-150 2WD
- 0 to 3 inches of lift adjustment over stock
- Eyelet bottom mount and gas charged 2.5-inch body
- Part number ICO91717, not compatible with CCD-equipped trucks
SKU: ICO91717 -
Shock Absorbers & Shock Accessories
Icon Vehicle Dynamics Extended Travel 2.5 V.S. IR Coilover Shock Kit – 91255
Shock Absorbers & Shock AccessoriesIcon Vehicle Dynamics Extended Travel 2.5 V.S. IR Coilover Shock Kit – 91255
- Front 2.5 V.S. IR coilover shock kit for the 2019 to 2023 Ford Ranger
- 2.5-inch gas charged body with OEM top mount and OEM bottom mount
- Fully rebuildable and revalveable
- Part number ICO91255
SKU: ICO91255
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.

