Overview
The ICON Vehicle Dynamics ICO48600 is a front 2.5 VS IR coilover kit for the 2021 to 2026 Ford Bronco. The internal reservoir coilovers allow up to 3 to 4 inches of lift adjustability on Broncos without the Sasquatch package, or 2 to 3 inches of lift over stock Sasquatch-equipped trucks, which makes room for larger wheel and tire combinations.
The larger 2.5-inch shock body and increased piston area over stock components provide more available travel and a smoother ride on and off the road. The kit is made to pair with ICON 2.5 Series rear coilovers so control stays balanced front to rear.
Key features
- Internal reservoir design with a 2.5-inch shock body
- Up to 3 to 4 inches of lift without the Sasquatch package
- Vehicle-specific shock length and valving
- Designed to pair with ICON 2.5 Series rear coilovers
- Runs 35 by 12.50 inch tires with or without Sasquatch.
Choosing coilover travel and lift
Front coilovers set the ride height and control how the front axle moves over rough ground. Shock length, piston area and valving all change how much travel is available before the suspension bottoms out, and how the truck feels on pavement. A shock with a larger body and internal reservoir gives the damper more oil volume to work with, which helps it hold steady during long stretches of washboard or fast desert running.
Lift height affects more than the front end. Changing the front height alters caster, driveline angles and the geometry of the upper control arms, which is why the coilover setup and the upper arms are usually chosen together. Larger tires also put more load on the bump stops and steering components, so check clearance at full compression before a trip. Keep the rear shocks matched to the front so the truck rides level and the damping feels consistent from end to end.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO48600 |
| Location and position | Front |
| Shock type | Internal reservoir coilover |
| Body diameter | 2.5 inches |
| Lift range | 3 to 4 inches without Sasquatch; 2 to 3 inches over stock Sasquatch |
| Fitment type | Direct fit |
| Vehicle | Ford Bronco, 2021 to 2026 |
Vehicle fitment
The kit fits the 2021 to 2026 Ford Bronco in the Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims. Bronco Raptor trucks are not compatible.
Bronco model years from 2023 onward and the Ford Bronco Sport are not on the list, and the Bronco Raptor is excluded. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
ICON says factory front upper control arms will not align properly past 2.5 inches of lift, so an aftermarket upper control arm is recommended above that height. With 37-inch tires, use the ICON travel limiters, part 611075, in the front. ICON recommends its upper control arms with Delta Joint Pro, part numbers 48400DJ or 48500DJ, because of the added wheel travel and lift. Cycle the suspension and check for ball joint bind before driving, since failure to do so can lead to component failure and injury.
Wheel and tire notes
With the Sasquatch package, ICON’s recommended wheels are 17 by 8.5 inches with a 4.75-inch backspace and 0mm offset, 18 by 9 inches with a 5.00-inch backspace and 0mm offset, and 20 by 9 inches with a 5.00-inch backspace and 0mm offset. Without Sasquatch, the recommended wheel is 17 by 8.5 inches with a 5.75-inch backspace and 25mm offset. Recommended tires are 35 by 12.50 inches on either package, with 37-inch tires requiring bump stop spacers and some trimming. Without Sasquatch, ICON recommends the high clearance crash bars, part 42000, for 35-inch tires.
What’s included
The kit is a front coilover set with an internal reservoir and a 2.5-inch body. Check the package contents against your installation before starting, including any upper control arms, crash bars or bump stops.




