Overview
The ICON Vehicle Dynamics ICO48601 is a front EXP coilover shock absorber for the 2021 to 2026 Ford Bronco equipped with the HOSS 1.0 suspension package. The EXP design keeps the Bronco’s factory coil spring and other components while adding a 2.5-inch aluminum shock body, which gives 1.5 to 3 inches of lift over stock on HOSS 1.0 trucks.
The shock is built on the Aluminum Series body, with a one-piece impact-extruded aluminum shell and a hard anodized finish. The shaft ends are machined to reuse the Bronco’s OEM upper shock and spring mounts, and the bottom uses a bar pin. The shock is custom tuned for the Bronco to work with its stock coil spring, and it can be revalved and rebuilt by a qualified technician with parts available from ICON.
Key features
- Reuses the Bronco’s factory coil spring and upper components
- Snap-ring grooves for front ride height adjustment from 1.5 to 3 inches over stock
- One-piece impact-extruded aluminum body, hard anodized
- 7/8-inch induction hardened and chrome plated shaft
- One-piece digressive piston tuned for the Bronco
- Fully rebuildable and revalveable
Choosing a lift height
Front coilovers change ride height without replacing the coil spring, so the lift you choose affects how the whole front end moves. Staying near the low end of the range keeps steering geometry and driveline angles closer to stock, while higher settings change how the truck sits on the road and off it. Think about the tires you plan to run and the load you carry, because both shift the stance you end up with.
Front and rear work together on a lifted truck. After a front height change, check the alignment, brake line length, sway bar links and steering components for stretch or binding. Many owners also replace the bump stops or upper control arm bushings at the same time, since those parts wear faster once the suspension moves through a different range.
- Re-check alignment after installation
- Inspect brake lines and sway bar links
- Match rear shocks to the front setup
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO48601 |
| Shock series | 2.5 Coilover |
| Shock type | Coilover |
| Body diameter | 2.5 inches |
| Shaft diameter | 7/8 inch, induction hardened, chrome plated |
| Top mount | OEM |
| Bottom mount | Bar pin |
| Lift range | 1.5 to 3 inches over stock on HOSS 1.0 |
| Hydraulic or gas charged | Gas charged |
| Location and position | Front |
| Fitment type | Direct fit |
| Vehicle | Ford Bronco, 2021 to 2026, HOSS 1.0 |
Vehicle fitment
It fits the 2021 to 2026 Ford Bronco in the Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
Badlands are not on the list, because the Badlands come with the HOSS 2.0 package as standard. The shock is not compatible with the Bronco Raptor, and models without HOSS 1.0 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With 35-inch tires, use the high clearance crash bars, part 42000. The 37-inch tire packages require the bump stop spacer kit, part 611082, plus trimming and modifications. Crash bar removal may be required for that setup, but it is not recommended.
Wheel and tire notes
ICON’s recommended wheel is 17 by 8.5 inches with a 5.75-inch backspace and 25mm offset. The recommended tire is 35 by 12.50 inches.
What’s included
The kit includes one EXP shock. Two are required per vehicle, and they are sold individually.





