Overview
The ICON Vehicle Dynamics ICO48700C is a front 2.5 VS remote reservoir coilover kit with Compression Damping Control Valves, CDCV, for the 2021 to 2026 Ford Bronco. It allows up to 3 to 4 inches of lift adjustability on Broncos without the Sasquatch package, or 2 to 3 inches of lift over stock Sasquatch trucks, for larger wheel and tire combinations.
Remote reservoirs add shock oil volume and surface area for heat dissipation, which helps resist overheating and cavitation under hard use that can lead to damper fade. The CDCV valves control fluid flow under compression, so damping can be set for street driving, slow crawling over rocks or high-speed desert running.
Key features
- Remote reservoir design for more oil volume and cooler operation
- Compression Damping Control Valves included
- 2.5-inch shock body with increased piston area over stock
- Vehicle-specific shock length and valving
- Designed to pair with ICON 2.5 Series rear coilovers
Setting up compression damping
Compression damping controls how quickly a shock resists being pushed in, which matters most when the wheel hits a rock, a ledge or a sharp bump. A damper set too firm can make the truck feel harsh on pavement and skip over small ruts. Set too soft, the front can wallow under braking and dive in corners. Adjusting the valves lets the same shock suit a commute, a crawl or a fast run across open desert.
Remote reservoirs keep the shock body cooler by moving oil volume away from the piston. Hot oil that thins out can make a damper feel inconsistent, so after long runs check that the reservoir is not overheated and that the shock body is cool to the touch. Inspect the hose and reservoir mounts for rubbing against tires or brackets, and tighten any loose fittings. Keep the front and rear settings in a similar range so the truck handles predictably.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO48700C |
| Location and position | Front |
| Shock type | Remote reservoir coilover with CDCV |
| Body diameter | 2.5 inches |
| Lift range | 3 to 4 inches without Sasquatch; 2 to 3 inches over stock Sasquatch |
| Fitment type | Direct fit |
| Vehicle | Ford Bronco, 2021 to 2026 |
Vehicle fitment
The remote reservoir kit fits the 2021 to 2026 Ford Bronco in the Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
Bronco Raptor trucks are not compatible, and later Bronco model years are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory front upper control arms do not align properly past 2.5 inches of lift, so ICON recommends an aftermarket upper control arm above that height, such as its Delta Joint Pro arms, part numbers 48400DJ or 48500DJ. Check ball joint bind by cycling the suspension after installation, because failure to do so may lead to component failure and injury.
Wheel and tire notes
ICON lists these wheels: with Sasquatch, 17 by 8.5 inches with a 4.75-inch backspace and 0mm offset, and 18 by 9 inches and 20 by 9 inches with a 5.00-inch backspace and 0mm offset. Without Sasquatch, 17 by 8.5 inches with a 5.75-inch backspace and 25mm offset. The recommended tire is 35 by 12.50 inches. Thirty-seven-inch tires need coilover bump stop spacers and trimming, and ICON recommends its high clearance crash bars, part 42000, when running 35-inch tires without Sasquatch.
What’s included
The kit includes the ICON Compression Damping Control Valves for the coilovers. Upper control arms, travel limiters and crash bars are not included.




