Overview
The ICON Vehicle Dynamics ICO53504 is an Intelligent Control, or IIC, install kit for CDEV shocks on the 2010 to 2024 Toyota 4Runner. IIC is the control computer for the Compression Damping Electronic Valves in the shock absorbers. It reads data from its onboard sensors, applies the rules set in the app and sends changes to the valves.
ICON mounts IIC to the 4Runner using application-specific brackets, hardware and wire harnesses, which it says make the install clean and tidy. The kit connects to ICON’s app over Bluetooth, which ICON describes as the user interface for monitoring, recording and adjusting the system from an iOS device. The app is the main control point for the system’s settings.
Key features
- G-force sensor and gyroscope data used to predict terrain and wheel position
- Data processed more than 1000 times per second.
- Changes delivered to CDEV valves in under 40 milliseconds
- G-Boost sensitivity for vertical movement and Corner Boost for lateral movement
- Normal, Desert and Haul drive modes, plus an unlimited number of custom presets
- Trip recording of time, speed, distance and G-forces
Living with the control unit
The IIC unit works with the 4Runner’s suspension by adjusting damping at the CDEV valves as the truck moves. Because the controller and its harnesses are exposed to road and trail debris, installation quality matters. Route harnesses away from heat, sharp edges and moving parts, and make sure connectors seat fully before the truck is driven.
On trail-focused 4Runners, the system is most useful when settings are checked on a known route. Changing drive modes gradually and noting what feels best helps avoid chasing a setup that only works on one surface. If a CDEV shock is replaced or serviced, check that the valves still respond to the controller before returning to regular use.
- Route harnesses clear of heat and moving parts
- Seat all connectors fully
- Check valve response after shock service
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO53504 |
| Kit type | Intelligent Control install kit for CDEV shocks |
| Connectivity | Bluetooth, ICON app for iOS |
| Drive modes | Normal, Desert, Haul, and custom presets |
| Sensors | G-force sensor and gyroscope |
| Fitment type | Direct fit |
| Vehicle | Toyota 4Runner, 2010 to 2024 |
Vehicle fitment
It fits the 2010 to 2024 Toyota 4Runner in the Limited, Nightshade, SR5, SR5 Premium, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Trail and Venture trims.
The kit is designed for 4Runners equipped with CDEV shocks. Verify year, model and trim before buying.
Installation notes
ICON mounts the IIC unit with application-specific brackets, hardware and wire harnesses for the 4Runner. The CDEV shocks it controls are a separate requirement and are not part of this kit.
What’s included
The install hardware is the application-specific brackets, hardware and wire harnesses for the 4Runner. CDEV shocks are a separate purchase and are not included with this kit.


