Overview
The ICON Vehicle Dynamics ICO58671 is a front EXP coilover shock absorber for the 2022 Toyota Tundra. EXP combines a 2.5-inch diameter aluminum shock with the factory coil spring, so the truck keeps its stock spring and other components while gaining 0 to 3 inches of suspension lift over stock.
The EXP sits between spacer lifts and threaded coilovers. The shock has a one-piece aluminum body, a 7/8-inch induction hardened chrome shaft, and a CNC machined aluminum spring seat that fits the Tundra’s OEM urethane spring seat. It is tuned for the Tundra and can be revalved and rebuilt by a qualified shock technician.
Key features
- Reuses the Tundra’s factory coil spring and components
- Snap-ring grooves for lift adjustment from 0 to 3 inches over stock
- One-piece impact-extruded aluminum body with hard anodized finish
- 7/8-inch induction hardened and chrome plated shaft
- Digressive piston design tuned for the Tundra
- Fully rebuildable and revalveable, with parts available from ICON
Shock maintenance and rebuilds
A coilover that is used for lift and daily driving takes constant load on its seals and shaft. Keeping the shaft and boot clean is the simplest way to extend seal life, since grit that gets past the seal scratches the chrome surface. Check for fluid seepage at the shaft after each trip, because a leaking shock loses damping control gradually.
Rebuilds are best done by a shop familiar with the shock’s internal parts, and the service history should be kept with the vehicle. Because the EXP keeps the factory spring, inspect the spring seat and its urethane pad for cracks or compression set during any shock service. Recheck the mount fasteners after the first few drives and whenever the shock is removed.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO58671 |
| Shock series | 2.5 Coilover |
| Shock type | Coilover |
| Body diameter | 2.5 inches |
| Shaft diameter | 7/8 inch, induction hardened, chrome plated |
| Top mount | OEM |
| Bottom mount | Eyelet |
| Lift range | 0 to 3 inches over stock |
| Hydraulic or gas charged | Gas charged |
| Location and position | Front |
| Fitment type | Direct fit |
| Vehicle | Toyota Tundra, 2022 |
Vehicle fitment
It fits the 2022 Toyota Tundra in the 1794 Edition, Capstone, Limited, Platinum, SR and SR5 trims.
The EXP shock is not compatible with Tundras equipped with Adaptive Variable Suspension or the TRD Pro. Tundras with load-leveling rear height control air suspension may not sit level. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lift heights above 2.25 inches over stock need the sway bar drop bracket kit, part number 55154, and aftermarket front upper control arms to keep alignment correct. The recommended wheels are 17 by 8.5 inches with a 5.75-inch backspace and 25mm offset. The recommended tire is 35 by 12.50 inches, and minor fender trimming may be needed. On SR5 trucks with TRD Sport packages, the lift range is 0.5 to 3 inches over stock.
What’s included
Each EXP coilover is sold individually, and two are required per vehicle. The shock re-uses the Tundra’s factory coil spring and upper shock and spring mounts rather than supplying them.




