Overview
The ICON Vehicle Dynamics ICO48602 is a front EXP coilover shock absorber for the 2021 to 2026 Ford Bronco equipped with the HOSS 2.0 suspension package. EXP keeps the factory coil spring and other components while replacing the shock with a 2.5-inch aluminum body, and on HOSS 2.0 trucks it provides 0 to 3 inches of lift over stock.
The shock is built on the Aluminum Series body, with a one-piece impact-extruded aluminum shell and a hard anodized finish for corrosion resistance. Its shaft ends are machined to fit the Bronco’s upper shock and spring mounts. The shock is custom tuned for the Bronco and can be fully revalved and rebuilt, with parts available from ICON.
Key features
- Re-uses the Bronco’s factory coil spring and OEM upper mounts
- Lift adjustment from 0 to 3 inches over stock through snap-ring grooves
- One-piece digressive piston design
- Hard anodized aluminum shock body
- 7/8-inch induction hardened and chrome plated shaft
- Fully rebuildable and revalveable
Choosing the right setup
The HOSS package determines which Bronco shock fits, so identify your truck’s suspension before comparing lift options. Owners with the Sasquatch package and owners without it run different wheel and tire combinations, and those choices affect how the shock works with the rest of the suspension. A front shock that keeps the factory spring preserves the original ride frequency, which many drivers prefer for daily use.
Front shocks are usually replaced in pairs so damping and ride height match from side to side. When you install new shocks, inspect the upper mounts and bushings, since worn rubber can change how the shock loads under braking and cornering. Keep a record of the wheel offset and tire size you run, because changes to either can affect steering feel and clearance.
- Confirm the HOSS package before ordering
- Replace front shocks as a pair
- Inspect upper mounts during installation
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO48602 |
| Shock series | 2.5 Coilover |
| Shock type | Coilover |
| Body diameter | 2.5 inches |
| Shaft diameter | 7/8 inch, induction hardened, chrome plated |
| Top mount | OEM |
| Bottom mount | Bar pin |
| Lift range | 0 to 3 inches over stock on HOSS 2.0 |
| Hydraulic or gas charged | Gas charged |
| Location and position | Front |
| Fitment type | Direct fit |
| Vehicle | Ford Bronco, 2021 to 2026, HOSS 2.0 |
Vehicle fitment
It fits the 2021 to 2026 Ford Bronco in the Badlands, Base, Big Bend, Black Diamond, First Edition, Outer Banks and Wildtrak trims.
It fits only Broncos equipped with the HOSS 2.0 package, and the Bronco Raptor is not covered. The 2022 Wildtrak can also be ordered with the optional HOSS 3.0 package, and this shock is designed for HOSS 2.0 trucks only. Before ordering, confirm the year, model and trim against your Bronco.
Installation notes
Without the Sasquatch package, 35-inch tires need ICON’s high clearance crash bars, part 42000. Thirty-seven-inch tires need the bump stop spacer kit, part 611082, and crash bar removal may be needed, though ICON does not recommend it.
Wheel and tire notes
Without Sasquatch, ICON recommends 17 by 8.5 inches with a 5.75-inch backspace and 25mm offset. With Sasquatch, it recommends 17 by 8.5 inches with a 4.75-inch backspace and 0mm offset. Recommended tires are 35 by 12.50 inches, and 37-inch packages may need fender trimming with Sasquatch.
What’s included
The kit includes one EXP shock. Two are required per vehicle, and they are sold individually.






